1.
Solution of Ultimate Load for Slope and Foundation with Finite Element Lower Bound Limit Analysis Method
边坡与地基极限荷载的下限有限元解
2.
Researches on Critical Edge Load,Critical Load and Ultimate Load of Soil Mass
地基的临塑、界限和极限荷载的探讨
3.
DOMINANT FAILURE MODES OF A TRANSMISSION TOWER AND ITS ULTIMATE CAPACITY UNDER WIND LOAD
风荷载下输电铁塔的失效模式及其极限荷载
4.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
5.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
6.
Strength and Limit Load Analysis of Concrete Arch Dams
混凝土拱坝的强度计算与极限荷载分析
7.
Dominant failure modes of transmission towers and the limit loads with wire breakoff
考虑断线时输电铁塔的失效模式及其极限荷载
8.
Analysis of factors affecting ultimate load of concrete based on ANSYS
基于ANSYS的混凝土极限荷载影响因素分析
9.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
10.
Limit Load Calculation and Risk Assessment of Buried Pipe;
埋地管道的极限载荷计算与风险评价
11.
Analysis of Beam Elastic-Plastic Limit under Random Loading Effect;
随机荷载作用下梁的弹塑性极限分析
12.
Plastic Limit Load Analysis of the Piping Branch Junctions with Defect Pitting Corrosion
含点蚀缺陷三通管塑性极限载荷分析
13.
Plastic Limit Analysis of Clamped Circular Plate under Linear Distributed Load
固支圆板在线性荷载作用下的极限解
14.
Upper bound analysis of plastic limit loads on orthotropic structures
正交各向异性结构塑性极限载荷的上限分析
15.
A Finite Element Analysis for Plastic Limit Load of Welded Piping Branch Junctions;
焊制三通管件塑性极限载荷的有限元分析
16.
Ultimate Strength of Stiffened Plates with a Square Opening Under Axial and Out-of-Plane Loads
轴向荷载与面外荷载作用下带方形开口加肋钢板的极限强度
17.
Analysis on Dynamic Response and Extreme Loads of Buried Gas Pipeline Under Blast Loading
爆炸载荷对埋地输气管道的动力响应和极限载荷分析
18.
Finite Element Analysis on the Plastic Limit Load of Welded Piping Tee under the External Load;
受外载作用焊制三通塑性极限载荷的有限元分析