1.
Characteristics Study on Laser Welding-Brazing of Aluminum/Titanium Dissimilar Materials;
铝/钛异种材料激光熔钎焊特性研究
2.
Research on Technology and Mechanism of Laser Welding-Brazing for Ti/Al Dissimilar Alloys
Ti/Al异种合金激光熔钎焊工艺与连接机理
3.
Laser welding-brazing characteristics of Ti/Al dissimilar alloy with assistant current
电流辅助钛/铝异种合金激光熔钎焊的特性
4.
Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing
铝/钛异种合金激光熔钎焊接头温度分布
5.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
6.
Laser Welding-Brazing Process and Microstructure Property of Al/Ti Joint;
Al/Ti异种合金的激光熔钎焊工艺及接头组织性能研究
7.
Study on Welding Procedure and Interface Behavior of Precoating TIG Welding-Brazing of Aluminum Alloy and Stainless Steel
铝合金/不锈钢预涂层TIG熔钎焊工艺及界面行为研究
8.
Characteristics of precoating TIG welding-brazing joint of aluminum alloy to stainless steel
铝合金/不锈钢预涂层钨极氩弧熔钎焊接头的特性
9.
eutectic brazing alloy
低共熔点软钎焊合金
10.
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
11.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
12.
Brazing of IC10 superalloy with Ni-based brazing fillers using Hf and Zr as melting-point depressants
Hf与Zr为降熔元素镍基钎料对IC10合金的钎焊
13.
Fusion-brazing Joining for Dissimilar Metals Between 5A02 Aluminium Alloy and Zinc-coated Steel Based on Laser-MIG Hybrid Welding
基于激光——MIG复合热源的5A02铝合金/镀锌钢熔——钎焊
14.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
15.
Transient Contact Liquid-Solid Reaction of Solder Droplet/Pad and Interfacial Microstructure Evolution;
钎料熔滴/焊盘瞬间接触液固反应及界面组织演变
16.
Effects of Latent Heat of Phase Change on Dynamic Behavior of Fluid Flow and Heat Transfer in Laser Weld Pool of Beryllium
相变潜热对铍材激光钎焊熔池内流场和温度场动态行为的影响
17.
Numerical simulation for transient behavior of fluid flow and heat transfer in laser-brazing pool of beryllium plate
铍材激光钎焊过程中熔池流场和热场的动态模拟技术
18.
MICROSTRUCTURE ANALYSIS OF INTERFACIAL LAYER WITH TUNGSTEN INERT GAS WELDING-BRAZING JOINT OF ALUMINUM ALLOY/STAINLESS STEEL
铝合金/不锈钢钨极氩弧熔-钎焊接头界面层的微观结构分析