1.
Interface behavior of TLP between chromium-copper alloy and stainless steel
铬青铜与不锈钢瞬间液相扩散焊接界面行为
2.
Microstructures and phase composition of QCrO.8/lCr21Ni5Ti joint by EBW with focus on sdteei side
铬青铜与双相不锈钢偏钢电子束焊接头组织及相构成
3.
Wetted parts: All Austenitic stainless steel and/or Stellite 6. Bronze wedges available.
接触液体的部件：全部都是奥氏体不锈钢和/或钨铬钴合金6。也可提供青铜楔板。
4.
Copper/Stainless Steel Countersunk
铜/不锈钢 沉头型
5.
Copper/Stainless Steel Standard
铜/不锈钢 标准型
6.
All finished metal surfaces, such as chrome, aluminum, brass, stainless, etc.
所有抛光金属表面，像铬合金、、铜、锈钢等。
7.
Yokesleeves– furnished in416 stainless steel or aluminum-bronze.
(9) 轭架套管-配置416不锈钢或铝青铜材料。
8.
Microstructures and Preoterties of Copper(Nitrogen)-Bearing Antibacterial Stainless Steels;
含铜（氮）抗菌不锈钢的组织与性能研究
9.
TIG welding for austenitic stainless steel tube plate and copper pipe
紫铜换热管与不锈钢管板接头的TIG焊
10.
MATHEMATIC MODEL OF RELATION BETWEEN CORROSION RATE AND Si CONTENT OF Cr-Ni STAINLESS STEEL
铬镍不锈钢的腐蚀率与硅含量关系的数学模型
11.
Chromium - Nickel Stainless and Heat-resisting Steel Spring Wire
铬镍不锈钢及抗热钢弹簧线材
12.
Bronze, stainless steel, and galvanized steel are also extensively used for specific types of buildings and particular service.
青铜、不锈钢、镀锌钢也广泛用于特定类型和专门用途的建筑物。
13.
Comparison between copper needle insertion and stainless steel needle insertion into rabbit ear central veins
铜针与不锈钢针留置于兔耳中央静脉内的比较
14.
Studies and Application of Stainless Steel Cathode in Copper Electrolytic Refining;
铜电解精炼不锈钢阴极材料的研究与应用
15.
Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube
黄铜与不锈钢管高频感应钎焊工艺的改进
16.
Torch-Brazing of T2 Copper with 1Cr17Ni2 Stainless Steel
T2紫铜与1Cr17Ni2不锈钢火焰钎焊焊接工艺技术研究
17.
Specification for high carbon chromium stainless bearing steels
GB/T3086-1982高碳铬不锈轴承钢技术条件
18.
Double-glow plasma chromizing at low temperature for 3Cr13 steel
3Cr13不锈钢低温双辉等离子渗铬