1.
Belt Joint Cold Glue Bind Method of Belt Conveyer Rice Mill
米厂带式输送机胶带接头的冷粘接方法
2.
Cold splicing the joints of the belt conveyer in brick and tile factory
砖瓦厂带式输送机胶带接头的冷粘接方法
3.
On fatigue strength test rig for rubber belt joint
橡胶带接头疲劳强度测试实验台的研究
4.
Application of Fill Joint Technique of Sticky Tape With Five-Retardant and Steel Wire Rope
钢丝绳芯阻燃胶带填充式接头技术的应用
5.
Study On the Adhesive of Nylon Based Balt Ends and the Technology of adhesion.
尼龙片基型传动带接头用胶粘剂及粘接方法的研究
6.
rubber tapped spilt brush
带胶皮头分裂式电刷
7.
Study on influence of adhesive layer size on performance for single-lap bonding joint
胶层尺寸对单搭胶接接头性能的影响研究
8.
Study on influence of part flaw of adhesive layer on load capacity of adhesive joints
胶层局部缺陷对胶接接头承载能力的影响研究
9.
heavy duty endless fabric type belt
重型无接头纤维编织带
10.
all socket cross
全带承窝的十字接头
11.
STRESS AND STIFFNESS ANALYSIS OF BI-ADHESIVE BONDED SINGLE-LAP JOINTS
混元胶接单搭接头的应力与刚度分析
12.
Effect of curing procedure on the impact toughness of adhesively bonded joints
固化工艺对胶接接头冲击性能的影响
13.
After connected servo extension cord and the attachment plug of servo wire, please wrap it with adhesive tape to avoid it getting off on the flying, Do make sure it is safety.
舵机延长线与舵机电气线插头连接后,应用胶带纸将其缠绕保险,以避免在飞行中脱落。
14.
Effect of Recessed Bonding on Stress Distribution and Strength of Adhesively Bonded Joints
间隙连接对胶接接头应力分布和强度的影响
15.
Elastic Stress Analysis of Single-Lap Adhesive-Bonded Joints
单搭接胶接接头弹性应力的二维分析方法
16.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响
17.
Improvement of Steel Wire Rope Core Belt Lacing Lap Joint Craftwork
钢丝绳芯输送带接头搭接工艺的改进
18.
Cover unused connectors with electrician's tape to prevent accidental contact.
用电工胶带缠好不用的连接器以防意外接触。