1.
Technology Method of High Speed Boring on Module’s Positioning Hole
高速镗削扩径头模块定位销孔的工艺实现
2.
Each datum, location pins, the number of the clamp sequence, check pin's name, the value of gap and tolerance need mark on checking fixture.
定位面，定位销，夹紧顺序，孔位测量销，模拟块偏置值及公差需有标识。
3.
Remove stem assembly (A) and lock setting by drilling hole and inserting dowel pin (C).
拆卸阀杆总成(A)，并且通过钻孔锁定设置和插入定位销(C)。
4.
Register punch: Precision punching device used in a punch register system.
定位打孔机:应用于打孔定位系统内的精密打孔机。
5.
elevator wrist pin keeper
升降机肘节销定位螺钉
6.
pinned open position
销钉固定的开启位置
7.
Punching is done with a special punch-register device.
打孔是用一种专用的打孔定位装置进行的。
8.
The theoretic problem of calculation of workpiece Orientation error when round orifices are oriented;
工件以圆孔定位时定位误差计算的理论问题
9.
"The upper end rests against a flat washer, or spring retainer, which is attached to the valve stem by a retainer lock (also called a keeper)."
上端抵在弹簧座上,在弹簧座的下面用栓销(或叫做定位销)加以定位。
10.
Pins with split pin hole
GB/T880-1986带孔销
11.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
12.
Research on the Target Location of Space-borne Synthetic Aperture Radar Image;
星载合成孔径雷达图像目标定位研究
13.
Processing of locating holes in dies based on Cimatron software
基于Cimatron软件的模具定位孔加工
14.
Study on axial vibration drilling to improve positioning accuracy
轴向振动钻削提高钻孔定位精度研究
15.
Design of Locator for Drilling Hole Based on ARM Embedded System
基于ARM嵌入式系统的钻孔定位仪设计
16.
Theoretical Probabilistic Principle and Method for the Orientation Precision Design of Pin
定位销定位精度设计的理论概率原理与方法
17.
The Calculation of Angular Error of Location on Condition of Arbitrary Edge Contact
定位销任意边接触时的角向定位误差计算
18.
Register pins: Pins which locate in holes made by a punch in a punch register system.
定位圆钉:应用于打孔定位系统内的圆钉，它套入由打孔机打出的孔洞。