1.
By adding bond in sintering mixture, we got following results: higher pellet yield, better sinter-bed permeability and good economic profit.
烧结混合料中配加粘结剂后提高混合料的成球率，改善了烧结料层的透气性，取得了好的经济效益。
2.
Opera Ting Practice of 360m~2 Sintering Deep-Bed in an Gang Sintering Plant
烧结厂360m~2烧结机厚料层生产实践
3.
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
4.
Practice of Increasing the Bed Depth in 360 m~2 Sinter Machine
提高360m~2烧结机料层厚度生产实践
5.
Microstructures of Ablated Carbon Layer of C_f/PAA Composite
C_f/PAA复合材料烧蚀“碳层”的微观结构
6.
Study on Sintering Parameters of Hematite Concentrate With 600mm Deep Bed at East Anshan Sintering Plant of AISC
鞍钢东烧厂600mm料层厚度赤精矿烧结工艺参数研究
7.
Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material
GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定
8.
Research on the Low Temperature Co-fired NiCuZn Ferrite and Multiplayer Chip Inductor Applications;
低温烧结NiCuZn铁氧体（LTCF）材料及叠层片式电感应用研究
9.
Sintering of Magnesium Aluminate;
MgAl_2O_4陶瓷材料的烧结研究
10.
Research of mechanism on sintered bricks made from high volume fly ash;
粉煤灰烧结砖原料处理与烧结反应机理的研究
11.
SiC-HfSi_2-TaSi_2 HIGH TEMPERATURE ANTI-ABLATION COMPOUND COATING ON CARBON/CARBON COMPOSITES
碳/碳复合材料SiC–HfSi_2–TaSi_2抗烧蚀复合涂层
12.
Preparation of Anti-ablation HfC Coating on C/C Composite Material
C/C复合材料抗烧蚀HfC涂层的制备
13.
Misunderstanding of porous coated anatomic porous layer bonded by sintering technology
采用烧结工艺粘结多孔层植入体多孔层的误解
14.
Study of Sintering Process from MSW Fly Ash and Sewage Sludge for Lightweight Aggregate;
焚烧飞灰与污泥混合烧结制取轻骨料基础研究
15.
Effect of Sawdust's Combustion Characteristic on Technological Properties of Sintered Porous Product
锯末燃烧特性对烧结多孔材料工艺性能的影响
16.
TiB_2/BN Laminated Ceramics Composites Maked by Spark Plasma Sintering System;
放电等离子烧结法制备TiB_2/BN层状陶瓷
17.
Study on the Mesoscopoic Surface Mechanical Properties of the Porous Self-lubricating Sintered Material;
多孔自润滑烧结体介层力学特性研究
18.
Stripping Technology of Nickel Coating on Sintering NdFeB Permanent Magnet
烧结型钕铁硼镀镍层退除工艺的研究