说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 国际单位制
1.
International System of Units(SI)
国际单位制(国际制)
2.
The State shall adopt the International System of Units (SI).
国家采用国际单位制
3.
This system is called the International System of Units, abbreviated SI.
这种单位制叫国际单位制,缩写为SI。
4.
Code for international system of units
GB/T9648-1988国际单位制代码
5.
units of non-international system of measurement chosen by the State (see Table 4);
国家选定的非国际单位制单位(见表4);
6.
the basic unit of thermodynamic temperature adopted under the System International d'Unites.
国际单位制采用的热力单位。
7.
the basic unit of electric current adopted under the System International d'Unites.
国际单位制所采用的电流的基本单位。
8.
the basic unit of luminous intensity adopted under the System International d'Unites; equal to 1/60 of the luminous intensity per square centimeter of a blackbody radiating at the temperature of 2,046 degrees Kelvin.
国际单位制所采用的基本光强度单位。
9.
the unit of solid angle adopted under the System International d'Unites.
国际单位制采用的立体角度单位。
10.
The new SI-a milestone for the foundation of base units
国际单位制——建立基本单位的里程碑
11.
the basic unit of length adopted under the System International d'Unites (approximately 1.094 yards).
国际单位制所采用的基本长度单位(约(待查表)码)。
12.
The unit of work and energy in the SI system is the joule(J).
国际单位制(SI)中,功和能的单位是焦耳(J)。
13.
Sievert / Sv refers to the SI unit of personal dose.
一七西弗:指国际单位制之人员剂量单位。
14.
In 1960, an official international body recommended the use of the International System of units.
1960年,一个官方的国际组织推荐采用国际单位制
15.
SI units and recommendations for the use of their multiples and of certain other units
GB3100-1993国际单位制及其应用
16.
"Electric potential is expressed in units of joules per coulomb, or volts."
国际单位制中,电势的单位为焦耳)/库仑,简称伏特。
17.
the unit of plane angle adopted under the System International d'Unites; equal to the angle at the center of a circle subtended by an arc equal in length to the radius (approximately 57.295 degrees).
国际单位制采用的平面角单位;长度等于半径的弧所对的圆心角。
18.
the force applied to a unit area of surface; measured in pascals (SI unit) or in dynes (cgs unit).
单位表面上所承受的力;单位是帕斯卡(国际单位制)或达因(厘米克秒制)。