1.
Study and Application in Low Rigidit Part by Finite Element Method and Technics Optimized;
低刚度工件切削加工中有限元分析与工艺优化方法的应用研究
2.
Research of EDG for Slender Rod With Low Rigidity
低刚度细长杆零件电火花磨削加工工艺研究
3.
Research on Prediction and Controlling Strategies of Low-rigidity Components Deflections in Peripheral Finish Milling;
低刚度零件数控侧铣精加工的变形预测与控制策略研究
4.
The sample system belongs among the elastic system whose stiffness and damping is low.
试件系统为低刚度和小阻尼的弹性系统。
5.
Simulation in the Process of Electrolytic Grinding of the Low Rigidity, Variable Cross-section Shaft;
低刚度、变截面轴电解磨削加工仿真技术
6.
Simulation in the Process of Electrolytic Grinding of the Low Rigidity,Variable Cross-section Shaft Based on CATIA
基于CATIA的低刚度、变截面轴电解磨削加工仿真
7.
Research on the Stiffness’Influence for the Precision of the Sleeve Parts' Machining
刚度对套筒类零件加工精度影响的研究
8.
Study on Processing Technology of Thin-walled parts Based on Theory of Stiffness
刚度理论视域下薄壁零件加工工艺研究
9.
The slip displacement increases the curvature, reduces the stiffness, increases the additional moment and consequently leads the increase of deflection.
滑移增大结构曲率,降低构件刚度,增加附加弯矩,从而引起挠度增大。
10.
Study on the High-speed Milling Process for the Weak Rigidity Workpieces of Anti-rust Aluminum Alloy
防锈铝合金弱刚度复杂构件高速铣削工艺研究
11.
The Simultaneous Optimization of Fixture Layout and the Clamping Sequences for Weak Stiffness Workpiece
弱刚度工件夹紧顺序与夹具布局的同步优化
12.
Study on Machining Deformation Control of Weak-rigidity Structural Parts
弱刚度结构件的加工变形控制技术研究
13.
static stiffness of the moving element suspensio
运动部件悬挂静刚度
14.
dynamic stiffnesss of the moving element suspension
运动部件悬挂动刚度
15.
Rigidity of and Influence Over the Processing Accuracy of Boring Stiff Shaft;
刚性镗削主轴刚度对加工精度的影响
16.
By changing these parameters and the Z-directional stiffness of the outer-ring, the stiffness and the damping characteristic of the damper can be varied.
在转子系统支承中引入摩擦阻尼器能够降低支承刚度，从而降低系统的临界转速，避开工作转速。
17.
The Study of a Date Collection and Processing System about Spindle Assembly Static Stiffness Testing of Milling Cutter and Maching Center;
铣削加工中心主轴组件静刚度检测数据采集与处理系统的研究
18.
Experimental Study on the ANAMMOX Process under the Low Concentration of Ammonia;
低浓度氨氮条件下厌氧氨氧化工艺试验研究