1.
Porthole die extrusion process numerical simulation and optimal die design
分流组合模挤压过程数值模拟及模具优化设计
2.
Development of CAD system of porthole extrusion die for hollow aluminum profiles
空心铝型材分流组合挤压模CAD系统开发
3.
Failure Mechanism Analysis of the Cold Extrusion Combination Concave Die and Numerical Simulation of the Extrusion Process
冷挤压组合凹模失效分析及挤压过程数值模拟
4.
Research on CAD/CAE System for Porthole Extrusion Moulds of Hollow Aluminum Profiles;
空心铝型材分流组合挤压CAD/CAE研究
5.
An Investigation on Structure of Extrusion Die and Optimization of Combined Dies about Support Shaft with Finite Element Method;
支撑轴挤压模具有限元分析及组合凹模优化
6.
Numerical Simulation of Metallic Flow Forming via Extrusion in Pocket and Porthole Dies
导流模和分流模金属挤压流动成形的数值模拟
7.
Effects of Die Leg on Welding Ability of Longitudinal Welds During Porthole Die Extrusion of Aluminum Profile
模桥结构对铝型材分流挤压纵向焊缝焊合性能的影响
8.
New Type Extruding Die Used Panel Separate Flow Die Guide Form Technology
应用平面分流模导流成形技术的新式挤压模
9.
FE Analysis of the Extrusion and Welding Process in Porthole Die for an Aluminum Alloy Square Tube
铝合金方管分流焊合挤压过程的有限元分析
10.
Finite Element Simulation of Internal Pressure of Backward-Extruding Containers and Optimization of Combined-Containers;
反挤压凹模内压力的有限元模拟及组合凹模优化
11.
A Classified Code System of Squeeze Casting Mould Basing on Group Technology;
基于成组技术的挤压铸造模具分类编码系统
12.
FEM Analysis in the Effect of Die Compression Section on Plastic Extrusion Flow
口模压缩段对塑料挤出流动影响的有限元分析
13.
Analyzing the Metal Moving and Designing the Mould in the Continuous Extrusion Extended Figuration;
连续挤压扩展成形金属流动分析与模具设计
14.
Characteristics of Multi-directional Extrusion and the Analysis of Metal Flow for Three Links Components
多向挤压模具及三通件的成形流动分析
15.
Effects of Squeeze Casting Die Temperatures and Pressure on Microstructure and Properties of 2024 Aluminium Alloy
挤压铸造模温及压力对2024铝合金组织性能的影响
16.
Synthetical Analysis of Extrusion Die Strength by FEM-Optimum and Photoelastic Method
挤压凹模强度的光弹性与有限元优化综合分析
17.
System Modeling and Analysis of Sensitivity on Composites Material Formed by Liquid-Solid Extrusion;
液固挤压复合材料工艺系统建模及灵敏性分析
18.
Simulation and Experiment Analysis of Dual-directional Extrusion of AZ31 Mg Alloy
AZ31镁合金双向挤压有限元模拟与实验分析