1.
Research and Design on Solidification Equipment and Drawing Control of Horizontal Continuous Caster;
铸铁水平连铸机凝固端及牵引控制设计研究与实验
2.
Analysis on Debonding Failure of Sheet-end Interface of Concrete Beams Strengthened with FRP;
FRP加固混凝土梁片材端部界面剥离破坏分析
3.
The Research in the Beam-on-foundation in the Anchored End of Continuously Reinforced Concrete Pavement;
连续配筋混凝土路面端部锚固地梁研究
4.
Behavior of FRP-To-Concrete Bonded Joints with Anchorage End;
一端锚固的FRP-混凝土粘结接头的力学行为
5.
CRCP Analysis on Road Pavement Resistance Force and End Anchoring
连续配筋混凝土路面板底摩阻及端部锚固分析
6.
Experiment Study of Beam Seismic Strengthened in Corner Joint Zone of Concrete Frame
混凝土框架角节点区梁端抗震加固试验研究
7.
Study on Soft Reduction Zone of Continuous Casting Strand and It's Application
连铸坯凝固末端轻压下压下区间研究与实践
8.
Finite Element Analysis on CRCP Considering the Sub-grade Friction
连续配筋混凝土路面端部锚固的有限元分析
9.
Effects on 77B Cast Slab Center Segregation of F-EMS
凝固末端电磁搅拌对77B铸坯中心偏析的影响
10.
RESEARCH ON CONSTRUCTION TECHNOLOGY OF END-ANCHORED PRESTRESSED CFRP BOARD REINFORCED CONCRETE BEAM
端锚预应力CFRP板加固混凝土梁的施工技术研究
11.
Analysis of the Resistence Capacity of the Reinforced Concrete Beams Strengthened with CFRP and the Stress Concentration at the Plate end;
碳纤维布加固混凝土梁承载力及碳纤维布端部应力的分析
12.
The Study of the Liquid Structure and Solidification Process of the Al-rich Al-Mn Alloys;
富Al端Al-Mn合金的熔体结构及其凝固过程的研究
13.
Experimental Study and Simulation on Concrete Filled Steel Tubular Column under Lateral Impact with Fixed-fixed Boundary Condition;
侧向冲击两端固定钢管混凝土柱动力响应的实验研究与仿真分析
14.
Application Research on Knee Joint of Reinforced Concrete Frame with Headed Reinforcement
带锚固板钢筋在钢筋混凝土框架顶层端节点的应用研究
15.
Studies on the Damage Failure of Concrete Filled Steel Tube under Lateral Impact with Fixed-Ends Condition
两端固定钢管混凝土结构构件在侧向冲击下损伤破坏的研究
16.
Experimental study on fire performance of restrained reinforced concrete beams strengthened with carbon fiber sheets
具有端部约束的碳纤维布加固混凝土梁耐火性能试验研究
17.
Strut-and-tie models for end anchorage zones in prestressed concrete T-section girder bridges and reinforcement design
预应力混凝土T梁桥端部锚固区拉压杆模型及配筋设计
18.
Revamping on Cooling Water System of S+F-Electromagnetic Stirring for Horizontal Concasting
水平连铸二冷区和凝固末端电磁搅拌冷却水系统改造