1.
The relationships among perforation diameter, density, phase and casing strength are clarified.
明确了射孔直径、度及相位等与套管强度的关系。
2.
Casing Strength Theoretical and Experimental Study of Thermal Recovery Steam Injection Wells;
注蒸汽热采井套管强度理论与试验研究
3.
Comprehensive Research on Influence of Perforation Parameters on Casing Strength and Producibility
射孔参数对套管强度和产能影响的综合分析
4.
Effect of elastic modulus of stratum and cement sheath on casing strength
地层和水泥环弹性模量对套管强度的影响分析
5.
Study on Strength Reduction of Casing with Surface Defects
表面缺陷深度对套管强度影响规律数值模拟研究
6.
Effects of Cement Sheath Elasticity Modulus and Thickness on Casing Strength in Salt Beds
岩盐地层中水泥环弹性模量和厚度对套管强度的影响
7.
The Application of Finite Element Method in the Strength Analysis of Casing after Hydraulic Sand Blast Slotting and the Optimization of Its Technological Parameters;
有限元法在水力割缝套管强度分析及工艺优化中的应用
8.
Study on residual strength of wearing casing in deep and ultra-deep wells
深井、超深井套管磨损后剩余强度分析
9.
Finite element ANSYS analysis method of bending casing collapsing strength
弯曲套管抗挤强度有限元ANSYS分析方法
10.
Method for Designing Casing Stem Strength in Heavy-oil Steam Injection Wells
稠油热采井套管柱强度设计方法研究
11.
Influence by Oil Casing Imperfections on Anti-Collapse Strength
石油套管几何缺陷对抗挤强度的影响
12.
Uncertainty Evaluation on Measurement Results of Stipulated Total Extension Strength for C95 Casing Pipe
C95套管规定总延伸强度测量结果不确定度评定
13.
Research on Collapse Strength of Oil Casing under Non-uniform Loads
非均布载荷下石油套管抗挤强度问题研究
14.
Prediction of Burst Strength of Oil Well Casing Strings with Micro-Cracks
含微裂纹油井套管的抗内压断裂强度预测
15.
Residual Collapsing Strength Analysis of Bending Part Casing in Medium/Short Radius Horizontal Wells
中短半径水平井弯曲段套管剩余抗挤强度分析
16.
Analysis of Large Diameter Gas Drainage Well Casing Collapsing Strength Computation
大口径瓦斯排放井套管抗挤强度计算分析
17.
Casing failure mechanism and strength design considerations for deep and ultra-deep wells
深井超深井套管损坏机理与强度设计考虑因素
18.
Collapsing Strength Analysis of Extra-heavy Wall Casing Under Nonuniform Loads
特厚壁套管在非均载荷下的抗挤强度分析