1.
Study and Program Development on Contact Nonlinear Problem of Screw Pairs Joint;
螺纹副联接结构中接触非线性问题的研究与软件开发
2.
Research on Screw Joint for Precise Assembly of Miniature Parts
微小型零件精密装配中的螺纹副联接技术研究
3.
Standard joint is a circular male and female configuration with a corrugated metal gasket.
标准连接是圆形外螺纹和内螺纹结构，配置波纹金属垫圈。
4.
Modal analysis of flange structure connected with screw bolts based on ANSYS
基于ANSYS的螺纹连接法兰结构模态分析
5.
Finite element analysis of the screw structure of the drill-stem junction
钻杆接头螺纹结构形式的有限元分析
6.
drill chuck with thread adapter
螺纹联接扳手钻夹头
7.
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3632-1995钢结构用扭剪型高强度螺栓连接副
8.
Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength
GB/T3103.4-1992紧固件公差耐热用螺纹连接副
9.
"Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves"
GB/T15188.4-1994阀门的结构长度外螺纹连接阀门
10.
" Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves"
GB/T15188.3-1994阀门的结构长度内螺纹连接阀门
11.
Analysis of Preload, Stress, Rellability of Titanium Screw Joint Structure;
钛合金螺纹连接结构预紧力、应力、可靠性分析
12.
Failture Analysis of Drilling Collar Thread Connections and Structure Optimization
钻铤连接螺纹断裂失效分析及结构优化
13.
Screwed 1;Screwed 2;Screwed 3;Screwed 4
螺纹接头 1;螺纹接头 2;螺纹接头 3;螺纹接头 4
14.
Screwed Joint 1;Screwed Joint 2;Screwed Joint 3
螺纹接头 1;螺纹接头 2;螺纹接头 3
15.
Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength
GB/T3098.8-1992紧固件机械性能耐热用螺纹连接副
16.
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3633-1995钢结构用扭剪型高强度螺栓连接副技术条件
17.
Reason for Low Tight Axle Strength of 10.9S Sets of Torshear Type High Strength Bolt for Steel Structures
钢结构用10.9S扭剪型高强螺栓连接副紧固轴力偏低原因分析
18.
boxpin connection
阴螺纹-阳螺纹连接