说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 磨损微粒
1.
Otinulation of osteolytic cytokine expression by micrometer-diameter wear particles
微米级磨损微粒刺激溶骨性细胞因子表达
2.
Feasibility of aseptic loosening induced by wear particles in rat air pouch models
以air pouch模型大鼠进行磨损微粒造成无菌性松动机制分析的可行性
3.
Effect of alendronate on osteoclastogenesis induced by wear debris
阿仑膦酸钠对人工关节磨损微粒刺激破骨细胞分化形成的影响
4.
The physical wearing process of 20+# steel by SBR is mainly resulted from the abrasion wear.
结果表明 ,2 0 # 钢被磨损的物理过程为磨粒磨损 (微切削 )。
5.
Study of Micrology Shape Analysis and Automatic Identification Technique for Wear Particles;
磨损磨粒的显微形态分析与自动识别技术研究
6.
Research on Micro-scale Abrasive Wear of TZNT Titanium Alloys in Simulated Body Fluid Environment;
模拟体液环境下TZNT钛合金微磨粒磨损研究
7.
Research on Micro-scale Abrasive Wear of TLM Titanium Alloys in Simulated Body Fluid Environment
人体腐蚀环境下TLM钛合金的微磨粒磨损研究
8.
Micro-abrasion Performances of TAMZ Alloy in Simulated Body Fluid
模拟体液环境下TAMZ合金的微磨粒磨损行为研究
9.
Study on the relationship between microtopography of brazed diamond and the abrasion of grinding grains
钎焊金刚石微观形貌与磨粒磨损状态关系研究
10.
Influence of SiC Concentration in Slurry on Microscale Abrasive Wear of TZNT Titanium Alloys
料浆中碳化硅含量对TZNT钛合金微粒磨粒磨损性能的影响
11.
Grain-abrasion Behaviour of Wear-Resistant Steel BHARDY
耐磨钢BHARDY的磨粒磨损行为
12.
Ridge and small particle formation are basic characteristics of wear.
该过程形成的山脊状条纹和微小颗粒是其磨损的基本特征。
13.
Friction and Wear Characteristics of SiC Nano-particles as Additive of Lubricating Oil;
纳米SiC微粒作为润滑油添加剂的摩擦磨损特性研究
14.
Molecular biological mechanisms of wear titanum particles inducing bone resorption of artificial joint
人工关节磨损钛微粒诱导破骨的分子生物学机制
15.
Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time.
在边界润滑条件下,镀层的磨损机制为粘着磨损与磨粒磨损并存.
16.
Study of Computer Identification and Analysis System for Wear Debris;
磨损磨粒的计算机识别分析系统研究
17.
Analyses of the Chips of High-Cr Iron Worn off under Abrasive Wear Conditions
高铬铸铁在磨粒磨损工况的磨屑形貌分析
18.
The Study on Formation Process of Three Kinds of the Typical Abrasive Debris
三种典型磨粒磨损磨屑形成过程的研究