1.
Only one wrench is able to install and dismount, due to fixed screw holes.
有固定螺丝孔，装卸只要一支扳手，更方便。
2.
Factorial Analysis on Microleakage at the Fixed Screw Holes of Implant Denture;
种植义齿固定螺丝孔封闭后微渗漏之析因分析
3.
Insert and screw the mounting screws through the motherboard screw holes and into the standoffs.
再将螺丝分别锁定在固定主机板用的铜柱螺丝孔位置中。
4.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
5.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
6.
Insert the needle into the needle bar until it will go no further. Securely tighten the needle clamping screw.
把机针深深地插进孔的深处，然后拧紧固定机针固定螺丝。
7.
A nail, screw, or bolt for clinching.
铆钉用于固定的钉子、螺丝或螺丝钉
8.
A tool for clinching nails, screws, or bolts.
紧钳固定钉子、螺丝或螺丝钉的工具
9.
tap(ping) drill
螺丝孔钻，螺丝底孔钻
10.
Screw, crank cover
曲柄轴盖子固定螺丝
11.
Speed Control Switch Mounting Screws
速度控制开关固定螺丝
12.
Strong rectangular frame fixed by screws, an inset hole every25 cm to fix the slotting auger, guard board, bunches of cables and circuit diagram sidekicks, etc.
坚固的用螺丝固定的长方框，每隔25毫米有一个嵌孔，用来固定槽沟、板、缆束及线路图插袋等。
13.
except the screws and nuts that held the knocker.
只有固定门环的螺丝和螺帽。
14.
Loosen two setscrews 5 in top feed cam 4.
拧松上送布凸轮4和固定螺丝52个螺丝。
15.
Loosen setscrews 2 in the vertical driving cam.
拧松上下传送凸轮的固定螺丝2。
16.
Loosen setscrew 2, and remove thread tention as m 5.
拧松固定螺丝2，卸下线张力(组件)5。
17.
Loosen setscrew 2.
拧松线张力台的固定螺丝2。
18.
Loosen setscrew 4.
拧松线张力杆固定螺丝4进行调整。