说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 粘接抗剪切强度
1.
Shear Bond Strength of Orthodontic Brackets Bonded with a Self-etching Adhesive;
自酸蚀粘接剂粘接抗剪切强度的实验研究
2.
Shear Bond Strength of Resin Brackets Bonded to Porcelain and Light-cured Composite Resin;
树脂托槽与瓷、光固化复合树脂粘接抗剪切强度的实验研究
3.
Shear Bond Strength of Metal Brackets Bonded to Porcelain and Light-cured Composite Resin;
金属托槽与瓷、光固化复合树脂粘接抗剪切强度的实验研究
4.
Effect of Chlorhexidine Application on Shear Bond Strength of Brackets Bonded with Fuji Ortho LC
氯己定对FujiOrtho LC粘接托槽抗剪切强度的影响初探
5.
Comparison on Shear Bond Strength of Edgewise Brackets Bonding with Three Orthodontic Adhensives under Different Adhensive Conditions;
三种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
6.
Effect of Self-etching Primer on Shear Bond Strength of Orthodontic Brackets within 1 Hour in Vitro
自酸蚀粘接系统粘接托槽1小时内抗剪切强度的实验研究
7.
Shear bond strength of three different orthodontic adhesives used in Fx glass ionomer cement filling materials
三种正畸粘接剂粘接玻璃离子充填体的抗剪切强度
8.
Comparison of Shear Bond Strength of Resin and Metal Brackets with Different Adhesives in Vitro;
金属托槽与树脂托槽应用不同粘接剂抗剪切强度的体外研究
9.
Effect of various surface treatmetns on the shear strength of orthodontic brackets
不同方法处理瓷修复体后粘接托槽的抗剪切强度
10.
Shear Bonding Strength of Orthodontic Resin Brackets with Different Orthodontic Adhensives in Vitro
树脂托槽在不同粘接剂下抗剪切强度的体外研究
11.
Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel
喷砂处理对脱落托槽与牙面粘结的抗剪切强度
12.
Testing method for compressive shear strength of dowel joint by inorganic adhesives
GB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
13.
Testing method for torsional shear strength of doedl joint by inorganic adhesives
GB/T14903-1994无机胶粘剂套接扭转剪切强度试验方法
14.
The Influence of Dentin Desensitizers on the Shear Bond Strength of a Total-etch System;
脱敏剂对全酸蚀粘接剂剪切强度的影响
15.
A contrast of the shear strength between two enamel adhesion techniques:self-etching and all-etching
自酸蚀与全酸蚀粘接系统对牙釉质剪切粘结强度的研究
16.
Indirect methods to measure the interface bond strength include the interlaminar shear strength test.
测量界面粘结强度的间接方法包括层间剪切强度试验。
17.
Study of the Effect on the Shear Bond Strength of Orthodontic Brackets of Different Concentration Fluorided Etching Fluid;
不同浓度氟化酸蚀液对托槽抗剪粘接强度影响的研究
18.
" Rubber, vulcanized--Method for determination of strength properties of adhesive to metal in shear by tension loading"
GB/T13936-1992硫化橡胶与金属粘接拉伸剪切强度测定方法