说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> Ⅰ-Ⅱ复合型断裂
1.
Experimental Research on Ⅰ-Ⅱ Mixed-Mode Fracture of 45 Steel;
45钢材料Ⅰ-Ⅱ复合型断裂的实验研究
2.
Experimental Investigation on Initial Cracking Criterion for Ⅰ-Ⅱ Mixed in Concrete
混凝土Ⅰ-Ⅱ复合型断裂起裂准则的试验研究
3.
The Experimental Study on Ⅰ-Ⅱ Mixed Mode Crack in Concrete by Means of Photoelastic Coatings;
光弹贴片法实验研究混凝土Ⅰ-Ⅱ复合型断裂
4.
AN EXPERIMENTAL STUDY OF MIXED-MODE Ⅰ-Ⅱ DYNAMIC FRACTURE OF MARBLE
大理岩Ⅰ–Ⅱ复合型动态断裂的实验研究
5.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
6.
Study on the Determination of Mode Ⅰ and Mode Ⅱ Fracture Parameters for Concrete;
混凝土Ⅰ型、Ⅱ型断裂参数确定的研究
7.
Numerical Simulation and Experimental Verification of Brittle Fracture for Mixed Ⅰ-Ⅱ Type of V-notch;
Ⅰ-Ⅱ复合型V型切口脆性开裂的数值模拟与实验验证
8.
Numerical study on the mode Ⅰ fracture toughness of Z-pin reinforced laminates
Z-pin增强复合材料Ⅰ型断裂韧性数值分析
9.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
10.
Ⅰ-Ⅱ Mixed-mode crack stress intensity factor of the finite element calculation and analysis
Ⅰ-Ⅱ复合型裂纹的应力强度因子有限元计算分析
11.
Propagation criterion for mixed mode Ⅰ-Ⅱ crack propagation and numerical simulation of the whole propagation process
混凝土Ⅰ-Ⅱ复合型裂缝扩展准则及扩展全过程的数值模拟
12.
Experimental Investigation on Initial Cracking Criterion and Numerical Simulation of Crack Propagation for Ⅰ-Ⅱ Mixed Mode in Concrete;
混凝土Ⅰ-Ⅱ复合型裂缝起裂准则的试验研究与裂缝扩展过程的数值模拟
13.
Mode transformation and fractography analysis of Ⅰ+Ⅲ mixed modefatigue crack propagation in 45~# steel
45~#钢中Ⅰ+Ⅲ复合型疲劳裂纹的转型扩展及断口分析
14.
It is shown that the singularity of the strain field at the crack tip is smoothed in non-local theory.
根据基于不同形式权函数的非局部理论,分析了Ⅰ-Ⅱ型复合裂纹尖端的应变场。
15.
Fatigue crack growth under I-III mixed-mode loading
基于Ⅰ-Ⅲ复合型疲劳裂纹扩展的研究
16.
Researches on Shear Stress Criterion of Ⅰ-Ⅱ Fracture Expansion
Ⅰ-Ⅱ型裂纹发展的剪应力准则研究
17.
Researches on Fracture and Fracture Mechanism of a New Type Wood-Plastic Composite;
新型木塑复合材料断裂及断裂机理的研究
18.
Calculation of Plane Ⅰ、Ⅱ Mixed-mode Stress Intension Factors with Thermal Weight Function Method
基于热权函数法的平面Ⅰ、Ⅱ型复合应力强度因子计算