1.
Yield-line Theory Application and Studying of Thin Plate Curve Problem;
薄板弯曲问题的塑性铰线法应用研究
2.
Virtual Work Method of Rectangular Two-Way Slab Considering Resistance Moment of Inclined Yield Line
考虑斜向塑性铰线抵抗弯矩的矩形双向板虚功分析法
3.
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory
利用塑性铰线理论求解墙体抗爆能力
4.
The plastic elemental stiffness matrix was derived by plastic-hinge method.
然后用塑性铰法推导了单元的塑性刚度矩阵。
5.
In-Plane Nonlinear Theory and Elastic-Plastic Stability of Pined Circular Arches;
两铰圆弧拱非线性弯曲理论和弹塑性稳定
6.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
7.
Mechanism of Plastic Hinge and Non-linear Analysis of Prestressed Subassemblage Concrete Frame
预压装配式预应力混凝土结构框架塑性铰机理研究及非线性分析
8.
A Study on Design Method of Plastic Hinge Appear in the Splicing Location of Beam in Column-Tree Frame;
树状柱框架钢梁拼接处产生塑性铰的设计方法研究
9.
PLASTIC HINGE ROTATION-BASED DESIGN METHOD OF SHEAR WALL'S BOUNDARY ELEMENTS
基于塑性铰转角需求的剪力墙边缘构件设计方法
10.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
11.
After the inelastic phase, the distributing of plastic hinges is proper and reasonable, and the requirement of ductility design of structure is satisfied.
进入塑性阶段后，塑性铰分布合理，满足了结构延性设计的要求。
12.
Shear Capacity of Plastic Hinge Region of RC Shear Wall;
钢筋混凝土剪力墙塑性铰区受剪承载力分析
13.
The Analysis of Pile-Soil-Structure Dynamical Interaction Based on Plastic Hinge Theory;
基于塑性铰理论的桩—土—结构动力相互作用分析
14.
Quasi-Static Cyclic Tests and Plastic Hinge Analysis of RC Structural Walls
钢筋混凝土墙准静力循环试验和塑性铰分析
15.
Study on Seismic Behavior of Beam-column Joint with Beam-end Steel Fiber Concrete Plastic Hinge;
梁端钢纤维混凝土塑性铰梁柱节点抗震性能研究
16.
EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF RC COLUMN WITH RUBBER LAYER BUILT IN ITS PLASTIC HINGE
塑性铰区埋入高阻尼隔震橡胶后RC柱抗震性能的试验研究
17.
Experimental research on seismic performance of high strength concrete circular column confined with carbon fiber sheets at plastic hinge zone
塑性铰区碳纤维约束高强混凝土圆柱抗震性能的试验研究
18.
New Large-deflection Flexure Pivot Based on Curved Flexure Element
基于曲线柔性单元的新型大变形柔性铰链