1.
The anti-plane fracture problems of cracked plate for functionally graded materials under shear loads is discussed.
讨论功能梯度材料裂纹板在剪切载荷作用下的反平面断裂问题。
2.
AN IMPROVED SOLUTION PROCEDURE FOR MATERIAL NONLINEAR FINITE ELEMENT ANALYSIS AND ITS APPLICATION TO 2-DIMENSIONAL FRACTURE PROBLEMS
材料非线性有限元法中的一种改进解法及其在平面断裂问题中的应用
3.
Fracture Mechanical Analysis of Horizontal Crack on the Upstream Face and Heel of Gravity Dams
重力坝坝面和坝踵水平裂缝的断裂力学分析
4.
Plane Strain Fracture Toughness Testing
平面应变断裂韧度测试的有效性研究
5.
Standard test method for plane-strain fracture toughness of metallic materials
GB/T4161-1984金属材料平面应变断裂韧度Kic试验方法
6.
The Study of High Polymer Bonded Explosives by Measuring the Plane Strain Fracture Toughness;
高聚物粘结炸药平面应变断裂韧度实验研究
7.
An Analysis of Horizontal Cracks on the Upstream Slope and the Heel of the Gravity Dams in Terms of Fracture Mechanics
重力坝上游坝面和坝踵水平裂缝的断裂力学分析
8.
Combination of Analytical and Finite Element Methods for Plane Elastic-plastic Fracture Analysis and Its Applications to the Fracture of Concrete Structures;
平面弹塑性断裂分析的解析与有限元结合解法及其在混凝土断裂力学中的应用
9.
The large bowlder surface of dinner table must be uplifted vertically in avoidance of breakage. The small one shall also be held vertically instead of horizontally.
、大面积的餐台玉石面，必须竖抬，避免餐台断裂。小面积的玉石面也应竖拿，切忌平面横抬横拿。
10.
The accepted designation for the plane-strain fracture toughness under these environments is this.
在这些环境下平面应变断裂韧性所采用的符号是这个。
11.
Analysis and Solutions for the Rupture of Main Shaft and Serious Vibration of Roat-shake Sifter
平面回转筛主轴断裂和振动加剧原因分析及解决方案
12.
Investigation on KIC of As-Deposited Ti-6Al-4V Alloy Fabricated by Laser Solid Forming
Ti-6Al-4V合金激光立体成形沉积态的平面应变断裂韧度
13.
The Baikal rift system was formed due to faulting on the late Cretaceous?Eocene. Epoch planation surface base.
在晚白垩世—始新世夷平面基础上,由于断裂作用形成了贝加尔裂谷系。
14.
Impact Fracture Curve and Fractured Surface Morphology of PA 6/POE Blends
PA 6/POE冲击断裂曲线及断面形貌
15.
The Analysis of Fatigue Fracture of Asphalt Pavements Base on Surface Cracking;
基于表面裂缝的沥青路面疲劳断裂分析
16.
Easily split along close parallel planes.
易裂的容易沿临近并行平面分裂的
17.
3-D FRACTURE MECHANICS CHARACTERISTICS AND CRITERION FOR PIPELINE STEEL WITH SURFACE CRACK
管线钢表面裂纹体的三维断裂特性和断裂判据研究
18.
The fracture surface traverses matrix as well as fibers and interface.
断裂表面横切过基体、纤维和界面。