1.
The Research of Uncertainty of National Standard of Pulse Parameter;
皮秒级脉冲波形参数国家基准不确定度的研究
2.
The Research of Key Technologies of National Standard of Pulse Parameter Based on "NTN" Technology;
基于“NTN”校准法的脉冲波形参数国家基准的关键技术研究
3.
Pulse Compression and Waveform Parameter Design for HFGWR
高频地波雷达的脉冲压缩和波形参数设计
4.
Synchronous On-line Detect of Welding Process Parameters and Molten Droplet Images in GMAW-P;
脉冲GMAW焊接电参数波形及熔滴过渡图像的同步在线检测
5.
A Study on the System of Digital Pulse Compression For Multi-waveforms in Frequency Domain;
多波形频域数字脉冲压缩系统的研究
6.
The Design of UWB Pulse Shapes on Gaussian Polynomials;
基于高斯函数的UWB脉冲波形设计
7.
Different waveform signals such as ramp function, step function, pulse function and exponential function are available by changing the parameters of the signal generator.
通过改变信号发生器的参数,可方便得到斜坡、阶跃、脉冲和e函数等各种不同波形的信号。
8.
Study on the Parameter Degradation of Silicon Microwave Pulsed Power Transistor
硅脉冲双极型微波功率管参数退化探索
9.
Influence of processing parameters on weld forming in double-pulse MIG welding of aluminum alloy
工艺参数对铝合金双脉冲MIG焊焊缝成形的影响
10.
The Research of Monopulse Technique Using Adaptive Digital Beamforming;
基于自适应数字波束形成的单脉冲技术研究
11.
Monopulse angle tracking with adaptive DBF antenna array
自适应数字波束形成天线的单脉冲角度跟踪
12.
automatic microwave pulse counter
自动微波脉冲计数器
13.
Analysis and Parameter Discussion on Lightning Impulse Test Wave of UHV GIS Equipment
特高压GIS设备雷电冲击试验波形及参数探讨
14.
The Calculation Model of Waveforms and Parameters of Impulse Voltage Generator and Simulation
冲击电压发生器波形和参数的计算模型与仿真
15.
Performance Analysis of Ultra-Wideband Transmitted-Reference Impulse Radio System With Multiple Pulse Types
多波形超宽带传输参考脉冲无线电系统性能分析
16.
Numerical study on coupling of microwave pulses into different shaped cavities through slots
微波脉冲与不同形状带矩形孔缝腔体耦合的数值模拟(英文)
17.
INFLUENCES OF ULTRASONIC PULSE SQUARE-WAVE CURRENT PARAMETERS ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF 2219 ALUMINUM ALLOY WELD JOINTS
超音频脉冲方波电流参数对2219铝合金焊缝组织和力学性能的影响
18.
A Shaping System for Pico-second Pulse with Multiple Parameters Based on Digital Elements
一种基于数字器件的多参数皮秒级脉冲成形系统