1.
Full View Furnace Workpiece Surface Temperature Monitoring and Detecting System Based on Color and Near-infrared Double CCD;
基于彩色及近红外双CCD的炉内工件表面温度全视场监视系统
2.
Numerical Calculation of the Temperature Field on the Multilayer Insulation of Satellite's Surface
卫星表面隔热组件温度场的数值计算
3.
Surface Roughness Simulation of High-speed Milling of Part with Curved Surface
高速铣削曲面工件的表面粗糙度仿真
4.
Zone-area calculation method of temperature distribution of I-shaped steel members exposed to fire on three sides
三面受火条件下工字钢截面的温度场分区计算
5.
The surface temperature is less than3℃ above the dew point.
底材表面温度没有达到高于露点3℃上的条件下。
6.
Analytical models for the surface electrical field and temperature distributions of novel PB-PSOI devices
新型PB-PSOI器件表面电场和温度分布模型研究
7.
Simulation of workpiece surface roughness base on NC milling machine;
基于数控铣床的工件表面粗糙度建模
8.
Design on Experimental Apparatus for Prediction of Surface Roughness
工件表面粗糙度预测实验系统的研制
9.
cylinder wall surface temperature transducer
汽缸壁表面温度发送器
10.
thermocouple surface temperature sensor
热电偶表面温度传感器
11.
Surface Temperature Gradients of an Exothermic System at Criticality for Generalized Heat Transfer
普适热传递条件下放热系统的临界表面温度梯度
12.
The grinding machine raises the precision of the workpiece and improves its surface finish.
磨床可以提高工件的精度与表面的光洁度。
13.
The incease in surface temperature of a component in air due to the power dissip-ation in the component.The power dissipationfor an inductor includes both copper and core losses.
在空气中一元件之表面温度因元件内部能量的释放所造成温度的增加量。
14.
Effect of Lapping Process on Surface Roughness and Residual Stress of Part
研磨工艺对工件表面粗糙度及残余应力的影响
15.
Below figure shows the relation between fumace temperatures, element temperature and element surface load under the condition that the element radiation isn't obstructed.
下图示出了元件辐射在不受阻碍情况下的炉温、件温度与表面负荷之间的关系。
16.
Study on Control Methods of Living Tissue Surface Temperature under Radialization by Compound Light;
复合光辐照条件下生物组织表面温度控制方法研究
17.
Effect of Tempering Air Cooling Temperature on Surface Residial Stress of 40Cr Steel Quenched and Tempered Heavy Forging
回火出炉空冷时温度对40Cr钢调质大锻件表面残余应力的影响
18.
It shows that the temperature on bridge deck pavement is a bit lower than that on the road pavement.
研究结果表明:桥面铺装的温度略低于路面温度。