说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 弹簧卡节点
1.
Analysis of a Novel Lightweight Structure-"Spring Clinch Joint Structure";
一种新型的轻钢结构—“弹簧卡节点结构”的研究分析
2.
Spring Clinch Joint and Feasible Analysis of Its Application in the Plane Type Space Truss;
弹簧卡节点及其在平板网架中应用的可行性分析
3.
current regulator armature spring
电流调节器电转子弹簧
4.
spring-loaded regulator
弹簧型自力式调节阀
5.
linkage control spring
悬挂机构力的调节弹簧
6.
If we let go, the elastic energy, as the spring passes through the equilibrium point, is converted to kinetic energy.
如果我们释放弹簧,那么弹簧经过平衡点时,弹性能就转变为动能。
7.
a fine spiral spring that regulates the movement of the balance wheel in a timepiece.
能够调节时钟摆轮的好的螺旋弹簧。
8.
The spring was rather strong but it worked smoothly.
弹簧虽是太紧一点,倒很顺手。
9.
Cloth simulation based on improved mass-spring model
基于改进的质点—弹簧模型的织物模拟
10.
a wheel oscillating against the hairspring of a timepiece to regulate its beat.
对着时钟的细弹簧震荡来调节它的拍子的轮子。
11.
Study on the Static Model of Flexible Joints of Springs Beam
板(杆)弹簧骨架柔性关节的静态模型研究
12.
Study on Superposition Throttle-Slice and Opening Valve Pressure of Hydro-pneumatic Spring
油气弹簧多片叠加节流阀片与开阀压力研究
13.
Converse analysis on rigidity characteristics of suspension spring with varied pitch,mean diameter and wire diameter
异径变节距悬架弹簧刚度特性逆向分析
14.
Computer-aided design of conoid helical-coil compression spring with equal pitch
等节距圆锥螺旋压缩弹簧计算机辅助设计
15.
Design Methods of Superposition Throttle Slices and Influence on Throttle Aperture of Hydro-Pneumatic Spring
油气弹簧叠加阀片设计方法及对节流缝隙影响
16.
Experiment and analysis of large deflection of throttle slice of hydro-pneumatic spring
油气弹簧环形节流阀片大挠曲变形分析与试验
17.
If valves, springs, or seals are to be inspected/replaced at this time, refer to Valves and Valve Springs later in this section for proper procedures.
如果阀、弹簧或密封要在此时检查/更换,关于适当的程序,请参阅本节后面的阀及阀弹簧。
18.
It was mainly composed of a grooving spring is located in the middle of the artificial vertebral body and the platforms are fixed to the upper and lower ends of the spring by forth-and-back hand thread.
切口弹簧与平台间以正、反向螺丝连接,通过旋转弹簧体可以调节平台的高度。