1.
Microstructures and Mechanical Properties of Low-Temperature Bainite in Low-Alloyed Hi-Carbon Si-Containing Steels;
低合金含硅高碳钢低温贝氏体的组织和力学性能
2.
Microstructure and Properties of New Type Bainitic Steels at Low Temperature Tempering
低温回火态新型贝氏体钢的组织性能
3.
Influence of the Finishing Rolling Temperature on Properties of Low Carbon Mn Bainitic Steels
终轧温度对低碳Mn系贝氏体钢性能的影响
4.
Process Research on the Isothermal Quenching of Ductile Iron of Austenite and Bainite;
奥氏体贝氏体球铁等温淬火工艺研究
5.
Study of High Carbon Low Alloy Bainite Steel Ball by Forged Isothermal Hardening
锻热等温淬火高碳低合金钢贝氏体磨球的研究与应用
6.
Precipitation Behavior of Sulfide in Low Carbon Bainitic Steel during Billets Cooling
坯料温降过程中低碳贝氏体钢硫化物的析出行为
7.
Effect of tempering temperature on the microstructure and mechanical properties of 600 MPa grade low carbon bainitic steel
回火温度对600MPa级低碳贝氏体钢组织和力学性能的影响
8.
Effect of Austempering Isothermal-Time at Bainite Field on Structure and Mechanical Properties of Low Silicon TRIP Steel
贝氏体区等温时间对低硅TRIP钢组织和力学性能的影响
9.
Effect of Tempering Temperature on Microstructure and Mechanical Properties of As-rolled Low Carbon Baintic Steel
回火温度对热轧低碳贝氏体钢显微组织和力学性能的影响
10.
Effect of Different Temper Temperature after Cold Deformation on Microstructure and Mechanical Properties of Low Carbon Beinaite Steel
冷变形后不同回火温度对低碳贝氏体钢组织和力学性能的影响
11.
On Quasi austempering Bainitic/Martensitic Ductile Iron Grinding Ball
贝氏体/马氏体球铁磨球准等温淬火工艺的研究
12.
Study of Continuous Cooling after Austenite Deformation of Low Carbon Bainitic Steels;
低碳贝氏体型钢变形奥氏体连续冷却研究
13.
Effect of Minor Boron on Undercooled Austenite Transformation in Low Carbon Bainite Steel
微量硼对低碳贝氏体钢过冷奥氏体转变的影响
14.
Study on the Bainite Morphology of ADI
等温淬火球铁贝氏体组织形态的研究
15.
On Nucleation and Growth Kinetics of Bainite Transformation of Low and Medium Carbon Steels;
中低碳钢贝氏体形核长大动力学研究
16.
Study on the Microstructure and Properties of Low Carbon Bainitic Steel Q460E;
Q460E低碳贝氏体钢的组织与性能研究
17.
Production practice of 700 MPa grade low carbon bainitic steel
700MPa级低碳贝氏体钢的生产实践
18.
Study on Ti-bearing low carbon bainitic steel with 900 MPa yield strength
900MPa含Ti低碳贝氏体钢的研究