1.
Study on Binders Designing and Debinding for Hardmetal Extrusion Molding;
硬质合金挤压成形剂设计及脱除技术研究
2.
Designing on New Binders for Ultrafine Cemented Carbide Bar Extrusion Molding
一种新型超细硬质合金棒料挤压成形剂的设计
3.
Compound Cold Extrusion of 7A04 High Strength Aluminum Alloy
7A04铝合金复合冷挤压成形工艺的研究
4.
Application and Study of Steel Bonded Carbide to Extrusion Stem
钢结硬质合金在冷挤压冲头上的应用研究
5.
The Study on Thin-Wall Tube Extrusion Forming Technology of Magnesium Alloy AZ31;
AZ31镁合金薄壁管材挤压成形工艺研究
6.
The Study on Tube Extrusion Forming Technology of Magnesium Alloy AZ31;
AZ31镁合金管材挤压成形工艺研究
7.
The Study on Extrusion Forming Technology of Magnesium Alloy AZ31 Spring Plank;
AZ31镁合金弹簧支架挤压成形工艺研究
8.
Microstructure and Properties of Extrusion Al-Si-Fe Alloy;
挤压成形Al-Si-Fe合金的组织及性能
9.
Effects of Squeezing Ratio on Sprayed Forming High Mn-containing ZA35 Alloy
挤压比对喷射成形高锰ZA35合金的影响
10.
Semi-solid thixo-extrusion of AlSi7MgBe alloy
AlSi7MgBe合金的半固态挤压成形
11.
Microstructure and Properties of ZL116 Alloy Parts Through Semi-solid Extrusion
半固态ZL116合金挤压成形与显微组织
12.
Study on Near-net-shape Hot-pressing of Mg Extruded Preform
镁合金挤压预成形坯模压近终成型工艺研究
13.
RESEARCH ON ISOTHERMAL COMPRESSION AND HOT EXTRUSION TECHNOLOGY SPRAY FORMED 60Si-40Al ALLOY
喷射成形60Si-40Al合金热压缩与热挤压工艺研究
14.
Study on Process Forming of Aluminum Alloy Products with Abnormal Shapes
铝合金壳体异形件温挤压成形工艺优化
15.
Thermal-Mechanical Coupling Numerical Simulation of Reciprocating Extrusion Processes on AZ31 Mg Alloy;
AZ31镁合金往复挤压成形热力耦合模拟研究
16.
Study on Forming Capability and Solidified Microstructures of Magnesium Alloy by Extrusion in the Semisolid;
镁合金半固态挤压成形性能及凝固组织研究
17.
Study on Extrusion Forming Technology and Experiment of 7A04 Aluminum Alloy Wheel Hub;
7A04铝合金轮毂挤压成形工艺与实验研究
18.
Study on Extrusion Forming Process and Experiment of 7A04 Aluminum Alloy Wheel Felloe;
7A04铝合金轮辋挤压成形工艺与实验研究