1.
Experimental Study on High Speed Milling Low-rigidity Structure Part of Aluminium Alloy
铝质弱刚度结构件的高速铣削试验研究
2.
Study on Machining Deformation Control of Weak-rigidity Structural Parts
弱刚度结构件的加工变形控制技术研究
3.
Study on the High-speed Milling Process for the Weak Rigidity Workpieces of Anti-rust Aluminum Alloy
防锈铝合金弱刚度复杂构件高速铣削工艺研究
4.
Analysis and Research of Temperature Effect in the Structure on the Condition of Different Side-displacement Rigidity;
不同侧移刚度条件下结构温度效应的分析研究
5.
One-dimensional FEM exact stiffness matrix for thin-walled bar structures
薄壁杆件结构一维有限元精确刚度矩阵
6.
The slip displacement increases the curvature, reduces the stiffness, increases the additional moment and consequently leads the increase of deflection.
滑移增大结构曲率,降低构件刚度,增加附加弯矩,从而引起挠度增大。
7.
The results show that the stress intensity and stiffness are enough.
结果表明，刚架结构的强度和刚度是足够的。
8.
The Simultaneous Optimization of Fixture Layout and the Clamping Sequences for Weak Stiffness Workpiece
弱刚度工件夹紧顺序与夹具布局的同步优化
9.
Qualitative Analysis of Dynamic Cutting Process Taking into Account Nonlinear Structural Stiffness of Machine Tool
机床结构刚度非线性条件下动态切削过程的定性分析
10.
Dynamic Stability of Cutting Process Taking into Account Nonlinear Structural Stiffness of Machine Tool
机床结构刚度非线性条件下的切削过程动态稳定性研究
11.
Analysis Method for Lightweight Material Substitution Design of Thin-walled Structures with Equal Stiffness
基于等刚度条件的薄壁结构的一种材料替代轻量化设计分析方法
12.
Experimental study on 3D cyclic behaviors of soil-structure interface under constant normal stiffness condition
常刚度条件下粗粒土与结构接触面三维力学特性试验研究
13.
Static and Stiff Analysis of Structural Parts Based on COSMOS/Works
基于COSMOS/Works的构件静强度与刚度分析
14.
Structural Analysis on 250-m Large-span Continuous Rigid Frame Bridge
250m大跨度连续刚构桥的结构分析
15.
Strength and Rigidity Analysis of the Frame of LG670 Compact Excavator
LG670小型挖掘机结构强度刚度分析
16.
Structure Improvement of Oil Sump Based on Structural Sensitivity Analysis
基于结构刚度灵敏度分析的油底壳结构改进
17.
Experimental research on torsional stiffness of steel reinforced concrete subjected
型钢混凝土构件扭转刚度的试验研究
18.
TORSIONAL RIGIDITY OF UNDER-REINFORCED CONCRETE SLABS
钢筋混凝土适筋板式构件的抗扭刚度