1.
Study on Laser Brazing with Filler Wire for Galvanized Steel Sheets and Numerical Simulation of the Thermal Process;
镀锌钢板激光填丝钎焊工艺与热过程数值模拟
2.
CO_2 Laser Welding with Filler Wire of Wrought Magnesium Alloys;
变形镁合金的CO_2激光填丝焊研究
3.
CO_2 Laser Welding of 7075 High Strength Aluminum Alloy with Filler Wire;
7075高强铝合金CO_2激光填充焊丝焊接的研究
4.
Aluminum Alloy's Welding by Laser with Filling Wire and Laser-Arc Hybrid Technology
铝合金激光填丝和电弧复合焊接技术研究
5.
The Mechanism Research on Laser Brazing of Diamond Grits;
激光钎焊金刚石磨粒工艺及机理研究
6.
Characteristics Study on Laser Welding-Brazing of Aluminum/Titanium Dissimilar Materials;
铝/钛异种材料激光熔钎焊特性研究
7.
The Growth Behavior of Interfacial IMC of Sn-0.7Cu/Cu by Laser Braze Welding
激光钎焊Sn-0.7Cu/Cu界面IMC生长行为
8.
Interfacial reaction between solder alloys and metallization during laser solder bonding process for optical fiber alignment
光纤定位激光钎焊键合过程中钎料与镀层的界面反应
9.
Interfacial Reactions and Alignment for Fiber Bonding by Laser Soldering;
光纤激光钎焊键合过程中界面反应及对准研究
10.
Experimental Study on Fiber Self Alignment by Laser Soldering;
激光软钎焊条件下光纤自对准的实验研究
11.
Effects of Laser Pulse Frequency and Scanning Mode on Welding Quality in Soldering by Fiber Laser
脉冲频率及扫描方式对光纤激光软钎焊的影响
12.
Delaminating Behavior and Formation Mechanism of the Interfacial Microstructure in the Laser Brazing Diamond with Ni-Cr Alloys
Ni基钎料激光钎焊金刚石磨粒界面显微结构及形成机理
13.
Experiment Investigation of the Diamond Grits Damage Mechanism by Laser Brazing;
激光钎焊金刚石颗粒损伤机理的实验研究
14.
Research on Technology and Mechanism of Laser Welding-Brazing for Ti/Al Dissimilar Alloys
Ti/Al异种合金激光熔钎焊工艺与连接机理
15.
Numerical Simulation and Experimental Study on Laser Brazingfilm CBN Gear-Honing-Tool
激光钎焊镀膜CBN外珩轮数值模拟与实验研究
16.
Laser welding-brazing characteristics of Ti/Al dissimilar alloy with assistant current
电流辅助钛/铝异种合金激光熔钎焊的特性
17.
Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing
铝/钛异种合金激光熔钎焊接头温度分布
18.
Fusion-brazing Joining for Dissimilar Metals Between 5A02 Aluminium Alloy and Zinc-coated Steel Based on Laser-MIG Hybrid Welding
基于激光——MIG复合热源的5A02铝合金/镀锌钢熔——钎焊