1.
It adopts outer pipe co-extrude technology, improving the joint stress among layers.
采用的外管共挤技术，提高了管材的层间结合强度。
2.
The adhesive strength of the acid film was stronger than that of the alkali film.
碱性镀层的结合强度优越于酸性镀层。
3.
Experiment and Study on Bond Strength of Asphalt Concrete Pavement Layers and Bridge Waterproofing Layer
沥青混凝土路面层间黏结强度及桥面防水层黏结强度试验研究
4.
General Strength Criterion for Composite Laminated Structures
复合材料层合板结构的广义强度准则
5.
Evaluation of Interlaminar Shear Strength of Laminates;
层合板复合材料层间剪切强度评价方法的研究
6.
Study on test methods of measuring bonding strength between protective layer of concrete or mortar and waterproofing material
保护层与防水层之间粘结强度试验方法的研究
7.
Flat belts--Determination of ply adhesion
GB/T6760-1986平带的层间粘合强度测定方法
8.
V belts-Determination of ply adhesion
GB/T3687-1989V带的层间粘合强度测定方法
9.
Thermal sprayed coatings--Determination of adhesion strength
GB/T8642-1988热喷涂层结合强度的测定
10.
Research of the Measurement for Bond Strength of Coating Using Stress Wave;
利用应力波测定涂层结合强度的研究
11.
Static Strength Analysis of Composite Laminates Considering Interlaminar Stresses
考虑层间应力的复合材料层压板静强度分析
12.
Indirect methods to measure the interface bond strength include the interlaminar shear strength test.
测量界面粘结强度的间接方法包括层间剪切强度试验。
13.
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。
14.
Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
GB/T4944-1996玻璃纤维增强塑料层合板层间拉伸强度试验方法
15.
The Study on the Indoor Test of Heavy Semi-stiff Inter-layer Integrated Technique
大厚度半刚性基层层间结合技术室内试验研究
16.
Conveyor belts--Determination of ply adhesion
GB/T6759-1986输送带的层间粘合强度测定方法
17.
Rubber and plastics hose--Determination of adhesion between components
GB/T14905-1994橡胶和塑料软管各层间粘合强度测定
18.
Effect of Metallic Bonded Coatings Prepared via Different Spraying Methods on the Adhesion of Ceramic Thermal Barrier Coating to Copper Substrate
粘结层喷涂方法对铜基体与热障涂层结合强度的影响