说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 合金焊丝
1.
Magnesium Alloy Welding Wires Prepared by Hot-Extruded and Welding Performance;
热挤压法制备镁合金焊丝及其焊接接头分析
2.
Application and Research on the Wire for Welding of Copper Aluminum Alloy
铜铝合金焊丝生产应用中的研究分析
3.
The Microstructures, Properties and Welding Experiment of Welding Wires Prepared from Mg-Al Eutectic and AZ91D Magnesium Alloys;
Mg-Al共晶和AZ91D镁合金焊丝的制备、组织、性能及焊接试验
4.
Study on the Welding Wire Used in Repairing ZL205A Alloy Castings;
ZL205A铝合金铸件焊补用焊丝的研究
5.
Study on Mechanism of the Activating Flux Coated Wire for Magnesium Alloy Welding and Development Process
镁合金活性焊丝焊接机理研究及制备
6.
The Research of Domestic Manufacture of Cored Hard Alloy Wire for Harding Rollers;
辊堆焊硬质合金类药芯焊丝应用国产化研究
7.
CO_2 Laser Welding of 7075 High Strength Aluminum Alloy with Filler Wire;
7075高强铝合金CO_2激光填充焊丝焊接的研究
8.
CO_2 Laser Welding with Filler Wire of Wrought Magnesium Alloys;
变形镁合金的CO_2激光填丝焊研究
9.
Development of YCJ601Ni-QL Flux-Cored Wire Used for High-Strength Low-Alloy Steel
YCJ601Ni-QL低合金高强度钢药芯焊丝的研制
10.
Design of Arc-Welding Robot for Tip Welding of Platinum Alloy Bushings
铂合金拉丝漏板板嘴弧焊机器人设计
11.
Distortion and properties of 7A52 aluminum alloy welded joint by single and twin wire MIG welding
单丝、双丝MIG对7A52铝合金焊缝性能和变形的影响
12.
MICROSTRUCTURE AND CORROSION PERFORMANCE OF WELD JOINT OF C4 ALLOY/X60 STEEL FILLED WITH LOW ALLOY STEEL FILLER
低合金钢焊丝焊接C4镍基合金/X60钢熔合区组织与耐蚀性
13.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
14.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
15.
Aluminum Alloy's Welding by Laser with Filling Wire and Laser-Arc Hybrid Technology
铝合金激光填丝和电弧复合焊接技术研究
16.
Large Area Surfacing Wear-resistant Composite Plate--Alloy Powder Surfacing with Self-shielded Flux-cored Wire Welding
大面积耐磨复合板堆焊—自保护药芯焊丝外添加合金粉工艺研究
17.
Intermetallic Compounds Formation and Reliability on Bonding Joints of Copper Wire and Gold Wire with Aluminum Alloy Pad;
铜及金丝与铝合金焊盘键合的金属间化合物生长和可靠性
18.
The Collecting and Character Analysis of the Welding Pool Image Based on the Doulde Wire Arc Welding Process of the Aluminum Alloy;
铝合金双丝焊接熔池图像采集与特征分析