1.
Comparison and Choice of the Temperature Maintaining Equipment in the Thin Slab Continuous Casting and Rolling
薄板坯连铸连轧生产线中间坯保温设备的比较
2.
Numerical Simulation and Optimization of Temperature Field in 1700 Slab Tundish
1700板坯中间包温度场的数值模拟及其优化
3.
Numerical Simulation of Flow and Temperature Field in Continuous Casting Tundish
小方坯连铸中间包流场温度场的数值模拟研究
4.
Numerical Simulation of the Coupled Fluid Flow and Temperature in Two-strand Slab Caster Tundish
双流板坯连铸中间包流动与温度耦合的数值模拟
5.
Technology for Long Life of Tundish and Non-stopper Steel Stream Protection of Billet Continuous Casting in ANYANG Iron & Steel Group Co. LTD;
安钢小方坯连铸中间包长寿及无塞棒控流保护浇注工艺研究
6.
Devitrification of Mold Flux Glassy Film for Medium Carbon Steel Slab
中碳钢板坯保护渣玻璃质渣膜脱玻化
7.
I went between the walls of clay.
我从泥坯码成的甬墙中间走过。
8.
Effect of Inner Structure of Tundish on Cleanliness of Casting Bloom
中间包内部结构对铸坯洁净度的影响
9.
Physical Simulation of Flow Field for Single Strand Tundish in Slab Continuous Casting
单流板坯连铸中间包流场的物理模拟
10.
Optimization Study on Configuration of 30 Tons Slab Continuous Casting Tundish
30t板坯连铸中间包结构优化研究
11.
Water Model Experiment on Optimization of 5-strand Billet Tundish Internal Shape
五流小方坯中间包内型优化水模实验
12.
As will be discussed later, the critical timed-temperature relationship needed for pasteurization is achieved by the residence time requirement in the holding tube.
巴氏杀菌所需的临界时间温度比由保温管中所需停留时间确定。
13.
Analysis of the Temperature of Slabs out of CCM in HCR Technology
热送热装工艺中板坯出连铸机温度的分折
14.
The clay used for the body was fired at a temperature of around 1300 C.
作瓶身的土坯要在1300度左右的高温中烘烤。
15.
THE APPLICATION OF THE WORKMANSHIP OF THE HIGH-TEMPERATURE COLORED-GLAZE LANDSCAPE;
高温颜色釉在陶瓷坯胎画作中的应用效果
16.
Billet Surface Temperature Measuring in the Thick Board Factory of Jinan Steel Group
钢坯表面温度检测系统在济钢中厚板厂的使用
17.
They are manufactured by high-grade stainless steel.
圆简形机箱内外两层不锈钢材板，中间夹保温层。
18.
Effect of Intermediate Table Insulation Technics on Microstructure after Rolling during Hot Tandem Rolling;
热连轧中间辊道保温工艺对轧后组织的影响