1.
Adopting the engaging process of the measuring rack- probe, the error of straight generatrix is measured, and by error analysis, the tooth profile error and tooth orientation error can be obtained.
采用刃边齿条测头,测量齿轮廓面的直母线偏差,通过误差分析分离出齿廓总偏差和螺旋线总偏差。
2.
Research on Measuring Uncertainty Parameter of Tooth Profile Slope Deviation
齿廓倾斜偏差测量不确定度参数的确定
3.
Parameterize Tooth Profile Slope Deviation Measuring Uncertainty in Gear Measuring Center Standard
齿轮测量中心标准中齿廓倾斜偏差测量不确定度参数的确定
4.
Research on Measuring Technology of Ultraprecision Gear Total Cumulative Pitch Error;
超精密齿轮齿距累积总偏差测量技术的研究
5.
limit deviation of root circle diameter
齿根圆直径极限偏差
6.
" Straight cylindrical involute splines--Modules, basic rack profiles and tolerances"
GB/T3478.1-1995圆柱直齿渐开线花键模数基本齿廓公差
7.
The Total Efficiency Optimization of Profile Modification of Cycloidal Gear
摆线轮齿廓修形量的总效率优化设计
8.
arithmetical mean deviation of the (roughness) profile
(粗糙度)轮廓的算术平均偏差
9.
An Algorithm to Measure the Profile of Gears under Eccentric State Based on Dichotomy
定位偏心状态下基于二分法的齿廓测量算法
10.
Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear
锥齿轮齿距及齿形偏差测量与分析方法
11.
Transmission error analysis of planetary gear train based on straight profiled internal gear
基于直廓内齿轮的行星轮系传动误差分析
12.
Research of On-Line Measuring Principle and Technology of Large Gears Pitch Error;
大齿轮齿距偏差在机测量原理与技术的研究
13.
Finite Element Contact Analysis of Helical Gears with Surface and Shaft Deviations
考虑齿面及轴线偏差的斜齿轮接触有限元分析
14.
Swing Movable Tooth Drive Mechanism with Double External(Double Internal) Tooth Profile
双外齿廓(双内齿廓)摆动活齿传动机构
15.
is the population (known) standard deviation. If omitted, the sample standard deviation is used
总体标准偏差（已知）。如果忽略，使用样本标准偏差。
16.
The affect of machining error on the mesh inside of small tooth number difference of the tooth outline overlap interference is studied in this paper, with the application of practical examples, and the corresponding solving methods are given.
应用具体实例,研究了加工误差对少齿差内啮合齿廓重迭干涉的影响,并提出相应的解决方法。
17.
Basic tooth profile of straight and skew bevel gears
GB/T12369-1990直齿及斜齿锥齿轮基本齿廓
18.
Retrieval of atmospheric profiles and surface skin temperature from MODIS infrared data based on the discrepancy principle
基于偏差原则利用MODIS红外资料反演大气廓线以及表层温度