1.
The Research on Forming Processes of Titanium Ring Pipe with Higher Strength
高强钛合金环形管热推弯曲工艺研究
2.
Growthing Behavior of β-phase Grain in High Strength Near-β Titanium Alloy Ti-26
近β型高强钛合金Ti-26的β晶粒长大行为
3.
Effect of Heat Treatment Process on Microstructure and Properties of Ti Alloy for Fasteners
热处理工艺对紧固件用高强钛合金棒材的组织和性能的影响
4.
Interaction Among Alloy Elements and Edge Dislocations in Ti Alloys and High Temperature Strengthening
钛合金中合金元素与位错交互作用与高温强化
5.
The Study of Thermal-Mechanical Processing Technique of High Strength, High Toughness and Damage Tolerant Titanium Alloy;
高强高韧损伤容限钛合金热机械处理工艺研究
6.
Study on Microstructures and Mechanical Properties of High-strength BT22 Cast Titanium Alloys;
BT22高强度铸造钛合金组织与性能的研究
7.
The Heat Treatment and Phase Transformation of a High Strength and High Toughness Titanium Alloy;
高强韧钛合金的热处理工艺及相变行为研究
8.
Development of 700 MPa Ti micro-alloyed high strength steel produced by EAF-CSP at Zhujiang Steel
珠钢EAF-CSP流程700MPa级钛微合金化高强钢的开发
9.
The Study on Fatigue Strength of Laser-weld of Titanium and Titanium Alloy;
激光焊接钛及钛合金疲劳强度的研究
10.
The Effects of the New Low Elastic Modulus β Ti Alloy on Bone Healing of Femur Fracture in the Rat Model
新型低弹高强度钛合金髓内钉对大鼠股骨骨折愈合的影响
11.
Fundamental and Applied Research on the Fatigue Resistance of Titanium and Titanium Alloy Cast Denture Clasp
钛及钛合金铸造卡环疲劳强度的应用基础研究
12.
The Study of Hydrogen Absorption by and Titanium Enhanced Hydrogen Absorption Effect of Titanium-Lithium Alloy;
钛吸氢及钛锂合金增强吸氢效应的研究
13.
A study on fatigue strength of laser welding of titanium and titanium alloy
激光焊接钛及钛合金腐蚀疲劳强度的研究
14.
Production choosing β titanium alloy after heat treatment could increase the high temperature intensity and wear off with hardness of HRC42.
选择β钛合金材质生产，经热处理后增加高温强度及耐磨性，硬度HRC42。
15.
EFFECT OF CYCLIC STRESS ON CREEP RUPTURE STRENGTH OF A CAST SUPERALLOY WITH HIGH Al AND Ti CONTENTS
循环应力对一种高铝钛铸造镍基合金持久强度的影响
16.
Technical and Mechanism Study on Brazing of SiO_2 Ceramic to 30Cr3 High-Tensile Steel and TC4 Alloy;
SiO_2陶瓷与30Cr3高强钢及TC4钛合金钎焊机理及工艺研究
17.
The Research on Mechanical Surface Treatment and Laser Alloying of Titanium;
钛表面机械强化及其激光合金化研究
18.
Titanium and titanium alloy bars
GB/T2965-1996钛及钛合金棒材