说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 耐湿热
1.
Method of test for resistance to heat and humidity of paint films
GB/T1740-1979漆膜耐湿热测定法
2.
Furniture--Assessment of surface resistance to wet heat
GB/T4893.2-1985家具表面漆膜耐湿热测定法
3.
Reliability Analysis of PBGA Devices at Hygrothermal Environment
PBGA封装的耐湿热可靠性试验研究
4.
" Method of producing of paint films for testing heat and humidity resistance,salt-fog resistance and accelerated weathering"
GB/T1765-1979测定耐湿热、耐盐雾、耐侯性(人工加速)的漆膜制备法
5.
Studies on the Physiological and Biochemical Characteristics of Heat and Humidity Tolerant Tree Peony;
几个牡丹品种的耐湿热生理生化特性研究
6.
Reliability analysis of PBGA devices with different finishes under hygrothermal environment in lead-free electronics package
无铅封装中镀覆层对PBGA耐湿热可靠性的影响
7.
Test methods about hygrothermal ageing resistance of building structural adhesives
建筑结构胶耐湿热老化性能测试方法研究
8.
The influence of14 kinds of fatliquors on the stability to wet heat and physical- mechanical properties of chrome leather were studied.
研究了14种加脂剂对铬革耐湿热稳定性及物理-机械性能的影响。
9.
The influence of11 kinds of retanning agents on the stability to wet heat and physical-mechanical properties of chrome leather were studied.
研究了11种复鞣剂对铬革的耐湿热稳定性及物理-机械性能的影响。
10.
Comparison of Wet and Hot Aging Resistance of T700 and T300 Carbon Fiber Strengthened Epoxy Resin Composites
T700和T300碳纤维增强环氧树脂基复合材料耐湿热老化性能的对比
11.
Quartz fibre strengthen Bis maleimide BMI composite material have low to dielectric loss angle, able to bear high temperature, damp and hot, good mechanics performance.
石英纤维增强双马来酰亚胺树脂复合材料具有低介电损耗、耐高温、耐湿热及良好的力学性能。
12.
The cured resin had good mechanical properties and moisture resistance.
在促进剂作用下,可以在125℃右固化环氧树脂,固化后的浇铸体有良好的力学性能和耐湿热性。
13.
Wet and heat ageing resistance is one of the most important properties of the building structural adhesives to which has been paid more attention recently.
耐湿热老化是建筑结构胶的重要性能指标,正在受到越来越多的关注。
14.
A kind of curing agent is prepared and thereof consists of the part of the adhesives which have showed good performance in the ageing test process.
采用自制的固化剂所配制的建筑结构胶耐湿热老化性能优良,完全满足国家标准的要求。
15.
Wire wound resistors are made by winding the resistance wire on the alkali less ceramic core, then coated with noncorrosice, heat-proof and humidty proof material.
把电阻线绕在无硷性耐热陶瓷件上,外面加上耐热、耐湿及耐腐蚀之材料保护固定而成。
16.
The Corrosion Resistance of Steel, Zine, Copper, Aluminium and Alloys in the Damp-Hot Zone of Vietnam
钢、锌、铜、铝和合金在越南湿热带的耐蚀性
17.
Estimation of the Aging Resistance of Membrane Structure Materials under Thermal, Humid and Ultraviolet Conditions
热、湿、光作用下膜结构材料耐老化性估计
18.
humid heat, atmosphere
湿热、 潮湿的空气.