1.
So the effective technique to enhance fatigue strength of a joint is to adept the high grade electrode for the top layer welding.
采用高匹配方案是锤击法提高疲劳强度的有效技术途径。
2.
Fatigue properties of high strength martensitic steels for transmission shaft
传动轴用高强度马氏体钢的疲劳性能
3.
The Fatigue Calculating and Craft Research for Improving Fatigue Life of the High Strength Connect Units for Mining;
矿用高强度接链环的疲劳计算和提高疲劳寿命的工艺研究
4.
Improvement of Fatigue Strength of High Strength Aerospace Fastener by Using Rolling
滚压加工技术提高高强航空紧固件的疲劳强度
5.
Fatigue Cracking Mechanism and Fatigue Mechanism Map of Two HSLA Steels at Low Temperature
两种低合金高强度钢的低温疲劳裂纹扩展机制及疲劳机制图
6.
"Carbon steel has high and low temperature strength, is very tough and has excellent fatigue strength."
碳钢具有高温和低温强度,具有很高的韧度和优异的抗疲劳强度。
7.
Compared with non-deformation steel,the fatigue stress of 1Cr18Ni9Ti austenitic stainless steel after 60% cold deformation is raised about 1.65 times.
经60%变形后,钢的疲劳强度提高了65%左右。
8.
Cause Analysis on the Lower Contact Fatigue Strength of Nitrided Part
渗氮件接触疲劳强度不够高的原因分析
9.
Initiation Mechanics of Fatigue Crack at Weld Joint of High Strength Bridge Steel
高强度桥梁钢焊缝疲劳裂纹萌生机理的研究
10.
STUDY ABOUT FATIGUE PROPERTY OF ULTRA-LONG LIFE OF HIGH-STRENGTH MEDIUM-CARBON STEEL C38
高强度中碳钢C38的超长寿命疲劳性能研究
11.
Fatigue performance of weld joint for high strength bridge steel
高强度桥梁钢焊接接头疲劳性能的研究
12.
Results show that in the middle life range the fatigue strength of interference-fit riveting increases by about 25% compared with that of conventional riveting.
研究结果表明：在中寿命区，干涉配合铆接的疲劳强度比普通铆接的疲劳强度提高约25%。
13.
Research on Fatigue Strength and Fatigue Cushioning Performance of Package Pad;
包装衬垫疲劳强度与疲劳缓冲性能的研究
14.
Fatigue Design Method of High Strenth Bolts Based on Fatigue Test Date;
基于疲劳试验数据的高强螺栓疲劳设计方法
15.
And when shot peening treater, the fatigue strength of the chian will improve 12.3%.
经喷丸处理链条疲劳强度可提高12.3％。
16.
Study on Synthetical Strengthening Technology Test for Roller Chain
滚子链疲劳强度的综合强化试验研究
17.
Relationship between Surface Length and Inside Length of Fatigue Crack in Ultra-high Strength Steel
航空用超高强度钢疲劳裂纹表面长度与内部长度之间的关系
18.
Influence of Shot Peening on High Cycle Fatigue Properties of High-strength Wrought Magnesium Alloy ZK60-T5
喷丸对高强度变形镁合金ZK60-T5高周疲劳性能的影响