1.
Welded brass tube
GB/T11092-1989黄铜焊接管
2.
Microstructure and Mechanical Property of Welded Joints of Copper/Brass
紫铜/黄铜焊接接头微观组织及力学性能研究
3.
A copper or brass fitting to which electrical wires can be soldered or otherwise connected.
焊片铜或黄铜配件，电线可与之焊上或接上
4.
Laser Welding on Dissimilar Metals of Brass/Copper and Brass/Low-Carbon-Steel;
黄铜与紫铜及黄铜与低碳钢异种金属的激光焊接
5.
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
6.
Copper phosphorus alloys. Useful for braze copper-copper or copper-brass, using flux.
以铜和磷为主要成份，用于铜-铜或铜-铜合金的焊接，需要使用助焊剂。
7.
Heat solder joints only to the point were solder will flow properly. Excessive heat may distort brass castings.
热焊料连接只能用在焊料能够正确流动的地方。过热可能扭曲黄铜铸件。
8.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
9.
Thermal effects of gas tungsten arc welding for thick copper plates at different welding condition
不同焊接条件下TIG焊接紫铜厚板的热效应研究
10.
Torch-Brazing of T2 Copper with 1Cr17Ni2 Stainless Steel
T2紫铜与1Cr17Ni2不锈钢火焰钎焊焊接工艺技术研究
11.
Microstructure investigation for the interface of electric resistance welded Cu/Al thin walled tube
薄壁铜铝管电阻焊焊接界面的微观结构研究
12.
The specification for welding of copper and copper alloy clad steel plate
GB/T13147-1991铜与铜合金复合钢板焊接技术条件
13.
WELDING TECHNOLOGY,WELDING MANAGEMENT AND THE QUALITY CONTROL OF THE STEEL BOX GIRDER OF HUANGPU BRIDGE OF PEARL RIVER IN GUANGZHOU
广州珠江黄埔大桥钢箱梁环缝焊接工艺、焊接管理及焊接质量控制
14.
" Marine brass pipe flanges, braze-on"
GB/T2507-1989船用焊接铜法兰(四进位)
15.
Controlled laser beam welding used in restoration of thin-wall ancient bronzes;
可控激光束焊接薄壁青铜器工艺实验
16.
Hot-Wire TIG Cladding Copper on Steel and the Microstructure Analysis of the Joint
铜/钢热丝TIG堆焊工艺及接头组织分析
17.
Welding Process of H69 Copper-plate and 6063 Aluminium-plate
H69铜板与6063铝板的焊接工艺
18.
TIG welding for austenitic stainless steel tube plate and copper pipe
紫铜换热管与不锈钢管板接头的TIG焊