1.
The piston rod steering structure analysis of disc type deburrer for billets
连铸坯圆盘式去毛刺机活塞杆导向结构分析
2.
guide piston complement for fuel pump
喷油泵导向活塞总成
3.
The design of levers differential pressure piston pilot cup float steam trap
杠杆差压活塞先导式钟形浮子疏水阀的设计
4.
Bang! There is an explosion in the cylinder. The explosion pushes the piston down. The piston is attached to a rod. The rod is attached to the crankshaft of the car.
砰!汽缸内产生爆炸，把活塞向下推动，活塞连着连杆，连杆又连着汽车曲轴。
5.
The piston end of the rod is attached to the piston by the piston pin, or wrist pin.
连杆的活塞端用活塞销或销轴安装在活塞上。
6.
barrel buffer piston rod assembly
枪管缓冲器活塞杆组件
7.
piston connecting rod arrangement misalignment
活塞-连杆布置失中
8.
double-acting single piston rod oil cylinder
双作用单活塞杆式油缸
9.
double-acting double piston rod oil cylinder
双作用双活塞杆式油缸
10.
helical spline type actuator
带螺旋活塞杆的液压缸
11.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
12.
rod that moves or is moved by a piston.
驱动活塞或被活塞驱动的连杆。
13.
The connecting rod is attached to the piston by the piston pin.
连杆与活塞的连接是采用活塞销。
14.
metal block that connects to a piston; it slides on parallel guides and moves a connecting rod back and forth.
一个与活塞相连的金属块；它在平行导杆上滑动，并且引导机器上的连杆儿来回移动。
15.
This paper analyses the differential control circuit of hydraulic pressure cylinder and its parameter, and works out the ratio of piston and the diameter of piston pole according to the requirement of speed rate.
分析了液压缸差动控制回路的型式和参数，并按速比条件导出了活塞与活塞杆直径的比值关系。
16.
"As the piston moves upward (pushed now by the revolving crankshaft and connecting rod), the air-fuel mixture is compressed."
当活塞向上运动时(这时是由转动的曲轴和连杆推动活塞),可燃混合气被压缩。
17.
"As the piston nears TDC, ignition takes place. The high combustion pressures drive the piston down, and the thrust through the connecting rod turns the crankshaft."
当活塞接近上止点时,发动机点火。燃烧产生的高压驱动活塞向下运动,通过连杆,推动曲轴转动。
18.
an oscillating lever connected to an engine piston rod and used to transmit power to the crankshaft.
可摆动的杠杆,与引擎之活塞相连,用以向机轴传送能量。