1.
Rubber and plastics hoses--Bore diameters and tolerances on length
GB/T9575-1988橡胶、塑料软管内径尺寸和长度公差
2.
The Method for Measuring Diameter Size of Ring with Universal Measuring Microscope
用万能工具显微镜测量环规内径尺寸的方法
3.
BORE AND STROKEThe size of an engine cylinder is referred to in terms of the Bore and stroke.
内径和行程:发动机气缸的尺寸与内径和行程有关。
4.
Broe gauges are used to measure internal hole dimensios and shape errors of different diameter and depth by comparative method.
内径百分表适用于比较法测量不同直径和深度和内孔尺寸及误差。
5.
"R.Radius, represents curve dimension."
半径,表示曲线尺寸
6.
Malleable cast iron pipe fittings--Type size--Reducing inner joints(nipples hexagon)
GB/T3289.27-1982可锻铸铁管路连接件型式尺寸异径内接头
7.
Malleable cast iron pipe fittings--Type size--Male and female reducing tees
GB/T3289.11-1982可锻铸铁管路连接件型式尺寸异径内外丝三通
8.
Malleable cast iron pipe fittings--Type size--Male and female reducing elbows
GB/T3289.5-1982可锻铸铁管路连接件型式尺寸异径内外丝弯头
9.
sizematic internal grinder
自动定尺寸内圆磨床
10.
the rate of increase in size per unit time.
单位时间内尺寸增加率。
11.
Use to add an angular dimension with dimension arrows that point inward.
用于添加指向内部的尺寸箭头的角度尺寸。
12.
"The pin gauges are used to measure the whole distance, the pitch diameter of the thread, etc. Especially, they are suitable for curved groove width measurement."
针规适用于机械加工中孔径、孔距、内螺纹小径的测量,特别适于弯曲槽宽及模具尺寸的测量。
13.
Flat belt drive pulleys diameters
GB/T11358-1989平带传动带轮直径尺寸
14.
Radial turbocharger--Connection dimensions
GB/T9485-1988径流式涡轮增压器连接尺寸
15.
large sapling
大幼树(高10英尺以上, 胸径4英寸以下)
16.
Study on Grain Refinement of Aluminum Rod of Large-Size Processed by Equal Channel Angular Pressing;
等径角挤压法细化大尺寸铝棒材晶粒尺寸的研究
17.
Before lighting the fuse, the hole was topped off with sand, and a three-foot-long, 1.25" diameter iron tamping rod was used to pack down the gunpowder.
在点燃之前，洞的上部填满了黄沙和一根长3英尺，直径1.25寸的内置火药的铁棒。
18.
The outside diameter of copper tube shall be tested by Micrometer. The tooth depth and the bottom wall thickness shall be tested by Microscope.
外径尺寸用外径千分尺测量.齿高和底壁厚用双目倒置小金相测量。