1.
Research on Upsetting of Cylindrical H62 in Micro-scale at Elevated Temperature;
微型H62黄铜圆柱体加热镦粗实验研究
2.
The Method of Upsetting Short Steel Ring in Hot State for Measuring the Blow Energy of Hammer
用钢质短圆环热镦粗法测定锻锤打击能量
3.
The Expert System of Electrical Upsetting Process for Valve Based on Artificial Neural Networks;
基于人工神经网络的气门电热镦粗工艺专家系统
4.
To make(a heated metal bolt, for example)shorter and thicker by hammering on the end.
镦粗，加厚锤打一端使（如加热过的金属条）变短变厚
5.
Study of Measuring Method and Transmitting Behaviour of Transient Temperature on Upsetting Die
镦粗模瞬态温度测试与传递特性研究
6.
Numerical simulation of the technics for upsetting a cylinder between two cone platens base on MSC.SuperForge
用MSC.SuperForge对锥形板镦粗工艺的数值模拟
7.
Technology for Mechanical Splicing of Reinforce-ment Bar and Automatic Cold Upsetter for REBAR
钢筋机械连接技术与全自动钢筋镦粗机
8.
Research on Numerical Simulation of Micro Copper Cylinder Upseptting Deformation Process;
微型圆柱件镦粗变形规律数值模拟研究
9.
The Upsetting-backward Extrusion Numerical Simulation for Axle Shaft Sleeve Based on DEFORM;
基于DEFORM的半轴套管体镦粗-反挤压数值模拟
10.
The Property and Formation of the Plastic Hinge in Rotary Forging and Upsetting Process of Ring Billet
摆辗镦粗工艺过程中塑性铰形成与特性研究
11.
Effect of annealing temperature on microstructure and transverse ductility of upset pure Mo bars
退火温度对镦粗纯钼棒组织和横向塑性的影响
12.
Study on the Prediction of 1Cr18Ni9Ti Forging Property in the Heating Process;
1Cr18Ni9Ti不锈钢热镦成形工艺性能预报的研究
13.
Research on Evolution of Void Defects in Heavy Forgings during Upsetting Process
大锻件镦粗成形中内部空洞型缺陷的演化规律研究
14.
Experimental Study on Densification of Mo Sintered Powder Upsetting and Its Preparation
钼粉末多孔体烧结材料的制备及镦粗致密实验研究
15.
Study of Heating Current Prediction Model in Electric Upsetting BP NN Based on Mechanistic Model;
基于机理的BP神经网络在电镦机中加热电流预报模型的研究
16.
In this paper,an extrusion-forging process for a knuckle of Benz heavy truck is introduced,which includes four steps: Upsetting,extrusion,pre-forging and forging.
奔驰重型卡车的转向节挤压锻造工艺,分为镦粗、挤压、预锻和终锻4个工步。
17.
Die structure was discussed through the analysis of forming process of high intension screw bolt and a set of hot upsetting tool was designed.
通过分析高强螺栓的成形工艺,对模具结构进行深入探讨,设计了一套热镦模。
18.
double-stroke solid-die automatic cold header
双击整模自动冷镦机