1.
Discussion on Mechanism for Vacuum Hot Rolling Bonding of Titanium Alloy and Stainless Steel;
钛合金与不锈钢真空热轧焊接连接机理探讨
2.
Development of Metal Powder-cored Wire for Submerged Overlaying on Hot Roll;
热轧辊埋弧堆焊用金属粉型药芯焊丝的研制
3.
Research on Change Rule of Cladding Rate of Hot-rolled Aluminum Matrix Brazing Sheet
热轧铝基钎焊板包覆率变化规律研究
4.
Analysis on Cause of Cracking in 06Cr19Ni10(304) Hot Rolling Stainless Steel Welded Pipe
06Cr19Ni10(304)热轧不锈钢焊管开裂原因分析
5.
Overlaying-repairing and heat treatment technology of 60CrMnMo steel roller
60CrMnMo钢轧辊堆焊修复及热处理工艺
6.
"The welder is used for coil joining in a hot dip galvanizing line, where material to be processed is cold-rolled low carbon steel. "
在热镀锌线中焊机用于连接冷轧低碳钢板卷
7.
Productive Trial Research about the Hot Rolling Strip Steel HP295;
焊接气瓶用HP295热轧钢带的生产试验研究
8.
Effect of Processing Parameter of Controlled Cooling on Microstructure and Phase Transformation of Wire Rod ER70S-6;
控冷工艺对热轧高线焊条钢相变及组织的影响
9.
Welder Tracking System for Continuous Galvanizing Line in Hansteel Cold Rolled Strip Plant
邯钢冷轧厂热镀锌线焊缝跟踪系统分析
10.
Titanium Argon-Arc Welding Between Laser Rapid Forming and Hot Rolled Plate
钛合金激光快速成形与热轧板材氩弧焊试验
11.
Intergranular Corrosion Susceptibility of Welded Joint of Stainless Steels
不锈钢热轧板材焊接接头的晶间腐蚀试验
12.
Electrochemical Corrosion Behavior of Weld Joint of Hot Rolled Austenite Stainless Steel Plates
奥氏体不锈钢热轧板焊接接头的腐蚀行为
13.
Microstructure and properties of heat-affected zone (HAZ) of welded joint on hot rolled stainless steel sheets
不锈钢热轧板材焊接接头的HAZ组织及性能
14.
Microstructures and Mechanical Properties of Saw Joints of Hot-rolled E36 Steel Plate
热轧E36钢中板埋弧焊接头的组织与力学性能
15.
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates
热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能
16.
Simulation of the Effect of Reheating on Temperature and Stress Fields of Hot Roller Steel Specimen;
预热对热轧辊钢试样堆焊温度场和应力场影响的数值模拟
17.
THE STATUS AND DEVELOPMENT ADVICE TO THE HOT ROLLED BAR AND WELDED BAR FABRIC USED IN CONSTRUCTION;
我国建筑用热轧钢筋和钢筋焊接网的现状和发展建议(上)
18.
The Research of Mechanical and Weld Properties of 400 Series Hot Rolled Ferritic Stainless Steel Plates
400系铁素体不锈钢热轧板材力学性能及焊接性能的研究