1.
Analysis and Improvement Meothods of Surface Defects of 15CrMoG Continuous Casting Blooms
15CrMoG钢连铸坯表面质量原因分析及防止措施
2.
EFFECT MECHANISM OF HIGH FREQUENCY ELECTRO-MAGNETIC FIELD ON THE SURFACE QUALITY AND EQUIAXED CRYSTAL RATIO OF 15CrMo BILLET
高频电磁场对15CrMo连铸坯表面质量和等轴晶率的影响机理
3.
Analysis and Improvement on Surface Quality of CC Round Billet for Pipe－rolling with Mandrel Mill
连铸连轧圆管坯表面质量分析与改进
4.
Control technology of surface quality of 360mm×450mm CC bloom
360mm×450mm连铸大方坯表面质量控制技术
5.
Research on the Casting Slab Surface Quality Prediction Expert System;
连铸板坯表面质量预报专家系统的研究
6.
Effect of Residual Elements on Continuous Cast Slab and Surface Quality of Hot Rolled Plate
残余元素对连铸坯和热轧板表面质量的影响
7.
MEASURES TO IMPROVE THE SURFACE QUALITY OF Q345B STEEL IN CONTINUOUS CASTING
唐钢FTSC薄板坯连铸提高Q345B钢表面质量的措施
8.
The Effect of Cross Section Area of Casting Bar on the Quality of Copper Rod for Electrical Application of SCR Continuous Casting & Rolling
铸坯截面积大小对SCR连铸连轧电工用铜线坯质量的影响
9.
Study on solidification of round billet horizontal continuous casting and quality of casting blank
水平连铸圆坯凝固及铸坯质量的研究
10.
In this paper the on-line real-time detecting system of molder surface temperature of continuous casting is designed.
设计了连铸铸坯表面温度在线实时测量系统。
11.
Effects of Gas Film on Hot Crack and Surface Quality of Semi-continuous Casting 6063 Aluminum Alloy Slab
气膜对6063铝合金连铸坯中心裂纹及表面质量的影响
12.
Material Features and Cladding Technology for Crystallizer Copperplate of Slab Caster
板坯连铸机结晶器铜板材质及表面镀层技术
13.
A slab surface temperature prediction model based on least square support vector machine
基于支持向量机的连铸板坯表面温度预测
14.
Analyses of cause for transverse cracks on CC slab surface
连铸板坯表面横向裂纹产生原因分析
15.
ANALYSIS ABOUT NET-SHAPE CRACKS ON THE SURFACE OF A350 LF6 CONTINUOUS CASTING BILLET
A350 LF6连铸坯表面网状裂纹分析
16.
CC-slab surface longitudinal crack prediction by using neural networks
基于神经网络的连铸坯表面纵裂预测
17.
Advancing the quality of continuous casting slab,creating the famous brand about angle steel
提高连铸坯质量,创精品角钢名优品牌
18.
QUALITY PROBLEMS AND COUNTERMEASURES FOR NEAR-NET-SHAPE CC OF BEAM BLANKS
近终形连铸异型坯的质量问题及对策