1.
working flank radius
齿廓工作段圆弧半径
2.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
刀尖圆弧半径补偿在内外径车削加工中的应用
3.
The effects of tool nose curvature radus on the accuracy in numerical control lathe;
数控车中刀尖圆弧半径对车削精度的影响
4.
Application of Tool Corner Radius Compensation in NC Turning
刀尖圆弧半径补偿在数控车削中的应用
5.
Analysis of tool nose radius compensation in numerical control turning processing
数控车削加工中刀尖圆弧半径补偿分析
6.
Error Analysis Caused of CNC Lathe Tool Nose Radius
数控车刀刀尖圆弧半径引起的误差分析
7.
THE DEMON STRATION FOR THE FORMULA ABOUT RADIUS AND LOCATION OF THE FORWARD CURVED BLADES OF CENTRIFUGAL FAN
离心式风机前弯曲叶片圆弧半径及中心位置之确定及其论证
8.
Using Arc Radius Compensation for NC Machine Cutter to Repair Errors in Processing;
谈利用数控车刀具圆弧半径补偿弥补加工中的误差问题
9.
Tool Nose Round (Corner) Radius Compensation and Tool Wear Compensation Based on FANUC 0iT NC System
基于FANUC 0iT系统刀尖圆弧半径补偿与刀具磨耗补偿
10.
The Analysis and Application of the Tool Radius Compensation in CNC Turning
数控车削加工中刀尖圆弧半径补偿的分析与应用
11.
The Influence of Cutting Corner Radius on the Cutting Process of Numerical Analysis
数控车削刀具圆弧半径对切削过程影响的数值分析
12.
A radian is the angle subtended by an arc of a circle whose length is just equal to the radius.
一弧度就是长度刚好等于半径的一段圆弧所对的圆心角。
13.
diameter of root circular-arc center circle
齿根圆弧中心圆直径
14.
diameter of tip circular-arc center circle
齿尖圆弧中心圆直径
15.
diameter of top circular-arc juncture circle
齿顶圆弧衔接点圆直径
16.
diameter of tip circular-arc juncture circle
齿尖圆弧衔接点圆直径
17.
diameter of root circular-arc juncture circle
齿根圆弧衔接点圆直径
18.
The area enclosed by two radii at a45= angle and the intersected arc.
八分圆一个被两条成45°角的半径及与之相交的弧所包围的区域