1.
Crack Arrest of Half-embedding Cracks of In-service 45 Steel Component by Electromagnetic Heating
在役45钢构件半埋藏裂纹的电磁热止裂
2.
Anaylisis of Crack Arrest and Mechaniclal Properity with Half-Embedding Crack Using Electromagnetic Heating Effect
带有半埋藏裂纹金属构件电磁热止裂及力学性能分析
3.
Limit Load and J-integral of Embedded Elliptical Cracks in Plates under Combined Tension and Bending
含椭圆形埋藏裂纹平板在拉弯组合作用下的极限载荷和J积分研究
4.
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
5.
Cause Analysis and Prevention Measure of Terminal Crack of Submerge-arc Welding Longtitudinal Weld
埋弧焊纵焊缝终端裂纹原因分析及预防措施
6.
SCATTERING OF SH-WAVES AND GROUND MOTION BY AN ELASTIC CYLINDRICAL INCLUSION AND A CRACK IN HALF SPACE
SH波对浅埋弹性圆柱及裂纹的散射与地震动
7.
Production and Prevention of Solidification Crack in Large-heat-input Submerged-arc Welding
大线能量埋弧焊凝固裂纹的产生及预防
8.
Side view of raised countersunk posidriv screw with adjustable thread length.
螺纹长度可调整的半埋头十字槽螺钉的侧面图。
9.
Side view of raised countersunk slotted screw with adjustable thread length.
螺纹长度可调整的半埋头一字槽螺钉的侧面图。
10.
Analysis of the Stress on a Half Infinite Cracks with Width
带宽度的半无限传播裂纹的应力分析
11.
The smaller the curvature and the larger the crack length the smaller will be the fracture stress.
曲线半径越小，裂纹长度越大，断裂应力也就越低。
12.
Three-Dimensional Finite Element Analysis of SIFs of Elliptic Surface Crack in Dimple Fastener
埋头紧固件椭圆形表面裂纹应力强度因子的三维有限元分析
13.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
14.
Inside Weld Tiny Crack Analysis and Control of SSAW Pipe with Heavy Wall-thickness
大壁厚螺旋埋弧焊管内焊缝微裂纹的分析及控制
15.
Scattering of SH-Wave by a Semi-Cylindrical Hill Above a Subsurface Inclusion and Crack;
SH波对夹杂裂纹附近半圆形凸起的散射
16.
Analysis of Surface Crack Semi-infinite Solid in Rolling Load;
滚动载荷作用下半空间表面裂纹的分析
17.
SCATTERING OF INTERACTING CIRCULAR LININGSTRUCTURE AND CRACK IN HALF SPACSE
半空间中圆形衬砌与裂纹对SH波的散射
18.
Analysis Asphalt Mixture Fatigue Crack Propagation Based on Semi-circular Specimen
基于半圆试件的沥青混合料疲劳裂纹扩展分析