1.
Technical Characteristic of XZKP Model FGD Device with High Efficiency and Hollow Tower Spray
XZKP型高效空塔喷淋烟气脱硫装置技术特点
2.
Numerical Simulation for Hollow-spraying-tower Flow Field of large-scale Wet Desulphurisation Spraying Tower
大型湿法脱硫喷淋塔空塔流场数值模拟研究
3.
Comparison between Spray Tower and Jet Bubbling Reactor Flue Gas Desulfurization Techniques
喷淋塔、鼓泡塔烟气脱硫技术的比较
4.
The atomization characteristics of wet flue gas desulfurization spray tower under single layer spraying
湿法脱硫喷淋塔单层喷淋雾化性能试验
5.
The air is passed through sprays of liquid.
空气通过液体喷淋装置。
6.
Experimental Study on Desulfurization and Nitrification in Spray Scrubber;
筛板式喷淋塔脱硫脱硝性能试验研究
7.
Experimental Study on Hydrodynamics and Desulfurization Characteristic of Nozzle in Spray Scrubber;
喷淋塔中喷嘴流体特性及脱硫特性试验研究
8.
The Research on One Improving Structure of Spraying Tower;
一种喷淋塔除尘器结构改进的性能研究
9.
Experiment Research & Numerical Simulation about Flow Field in a Spray Scrubber of Desulfurization;
喷淋式脱硫塔内流场的试验研究和数值模拟
10.
Numerical Simulation of Influence of Inlet Location on Flow Field in Spray Tower
入口位置对喷淋塔流场影响的数值模拟
11.
Modification of Spray System of Ccondenser in Direct Air-cooled Unit
直接空冷机组凝汽器散热片喷淋改造
12.
The coke car moves quickly from the oven end along rails into a quench tower and the coke is sprayed with water.
运焦车沿轨道快速从高炉移动到淬火塔并用水喷淋焦炭。
13.
In this paper, the application of a new spraying foam used in desulfurization of gangue heat and power plant flue gas is introduced.
介绍了一种新型喷淋泡沫塔在煤矸石热电厂烟气治理中的应用。
14.
Experimental Study on Pressure Drop Characteristics in a WFGD Sieve Tray Spray Scrubber
湿法烟气脱硫筛板式喷淋塔阻力特性的试验研究
15.
Numerical Simulation of Flow Field Inside WFGD Under Different Spray Levels Operation
不同喷淋层投运方式下脱硫塔内流场特性的数值研究
16.
Simplifying and validating the model of wet flue gas desulphurization spray tower for 660MW units
660MW机组湿法烟气脱硫喷淋塔的简化模型及仿真验证
17.
The numerical simulation of gas transport in large-space buildings under the action of water spray
水喷淋下大空间建筑烟气输运的数值模拟研究
18.
Discussion on spay section design of air handling unit for automobile painting line
汽车涂装线空调机组喷淋段的设计探讨