1.
On the Influence of Initial Pressure on Natural Gas Hydrate Formation in a Porous Medium
初始压力对多孔介质中气体水合物生成的影响
2.
Combustion Characteristics of Hydrogen-Enriched Natural Gas Under Various Initial Pressures
不同初始压力下掺氢天然气的燃烧特性
3.
Influence of Initial Pressure on Flame Propagation Characteristics of Natural Gas-Hydrogen-Air Mixture
初始压力对天然气-氢气-空气混合气火焰传播特性的影响
4.
An energy method for calculate borehole pressure under decoupled charging
不耦合装药条件下炮孔初始压力计算的能量方法
5.
Benefit of this modified shape is that the expansion around the first corner reduces the initial pressure coefficient on the frustum to low values.
这个改进的外型的优点是绕第一角点的膨胀会把截锥上的初始压力系数减少到很低的值。
6.
Numerical Analysis of the Pressure Relief Effect on Slot at Different Initial Stresses
初始应力对缝槽卸压效果影响的数值分析
7.
Influence of initial stress of thin pressing parts on welding hot cracking susceptivity
薄壁冲压件初始应力对焊接热裂纹敏感性影响
8.
Effects of initial defects to the limit load of pressure cylinder shell
初始缺陷对耐压圆柱壳结构极限承载力的影响
9.
Influence of Testing Media on Primary Bubble Point Pressure of Metallic Fiber Felt
介质对金属滤毡初始气泡点压力的影响
10.
Solution to initial horizontal stress and lateral earth pressure coefficient at rest by flat dilatometer tests
扁铲侧胀试验求解初始水平应力和静止侧压力系数
11.
The incipient yield pressure of the cylinder is gained by analyzing the experimental data.
通过对该实验数据的分析得到了圆筒的初始屈服压力。
12.
In 1571 as an ex-bailiff he began another year of office as chief alderman.
能够顶住事业初期的压力的人，始终值得尊敬，也有资格成功。
13.
COMBUSTION CHARACTERISTICS OF NATURAL GAS AT VARIOUS INITIAL TEMPERATURE AND PRESSURE
天然气在不同初始温度和压力下的燃烧特性研究
14.
Some New Analytical Results for Plastic Buckling and Initial Post-Buckling of Plates and Cylinders Under Uniform Compression
均布压力作用下板和柱面塑性屈曲和初始后屈曲的分析结果
15.
Inititial excess pore-water pressure developed during single pile driving
单桩沉桩引起的初始超孔隙水压力及其消散的计算
16.
The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress.
残余应变是由于周期剪切引起孔隙压力增长,在初始剪力作用下产生的附加的剪应变.
17.
Meanwhile, the application fills initialization files with driver names, port assignments, and other details that ease the programmer’s burden.
在这个期间，程序用驱动程序名、端口分配和减轻程序员压力的其他细节填充初始化文件。
18.
The results show that the initial parameters and thepressure difference between outer and inner surface of the hollow jet play adominant role on the shape of the liquid jet.
结果表明，旋流喷嘴的初始参数和空心射流内外表面压力差是决定射流形状的主要因素。