1.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
2.
Research of Transverse Stress Reduction in Prestretching of Aluminum Alloy Thick Plate
铝合金厚板拉伸过程横向残余应力消减分析
3.
ANALYSIS OF TRANSVERSE THERMAL RESIDUAL STRESS IN COMPOSITES BASED ON THE PRESSED TUNNEL MODEL
基于压力隧洞模型的复合材料横向热残余应力分析
4.
The in_ cavity residual stress in first principal direction result shows the forces left in the part after ejection in the orientation direction.
第一方向残余应力?品顶出时在配向方向上的残余在产品中的力。
5.
Considerable residual stresses exist in the normal direction.
在其厚度方向存在着可观的残余应力。
6.
Effects of Residual Stress and Stress Relief Annealing on the Properties of Non-oriented Electrical Steel
残余应力及去应力退火对无取向电工钢性能的影响
7.
Model Building Technique Study of Weld Residual Stress and Distortion;
焊接残余应力和残余变形分析的建模技术研究
8.
Measurement of the Residual Stress of the Welded Bogie Frame with Barkhausen Effect
利用巴克豪森效应测量转向架焊接构架残余应力
9.
A common method of creating a beneficial residual stress pattern is by peening the surface.
一个产生有盖的残余应力模型的常用方法是向材料表面喷丸。
10.
Study on Residual Stresses Induced by Moisture Absorption in Unidirectional Carbon Fiber/Epoxy Resin Composites
碳纤维/环氧树脂单向复合材料的吸湿残余应力研究
11.
Analysis on Axial Thermal Residual Stress of Metal Matrix Composites Reinforced by Fiber
纤维增强金属基复合材料中轴向热残余应力分析
12.
Test and Research on Nondestructive Measurement of Residual Stress Distribution in Bogies with the Magnetic Elastic Method
磁弹性法无损测试转向架残余应力分布的试验研究
13.
Static Roading Relaxation of Residual Stress and the Optimum Residual Stress Field Induced by Shot Peening
关于残余应力的静载松弛与最佳喷丸残余应力场的研究
14.
Effects of External Restraining Forces on Bead-on-plate Welding Residual Stress
外拘束力对堆焊焊接残余应力的影响
15.
The Mechanism and Application of Relieving Residual Stress in Libration;
振动时效消除残余应力的机理及应用
16.
On steel structure welding residual stress control and eliminate remnant method
论钢结构焊接残余应力控制与消残方法
17.
Investigation on Determination of the BEM Aided Welding Residual Stresses
边界元辅助焊接残余应力计测的研究
18.
TEST AND ANALYSIS ON RESIDUAL STRESS OF COLD-DRAWN TUBE AND BAR
冷拉拔管棒材的残余应力测试与分析