1.
Research on Hydraulic Design and Application on Stamping and Welding Multistage Pump;
关于冲压焊接多级离心泵水力设计的研究
2.
Optimum Design and CFD Analysis on Stamping and Welding Multistage Stainless-steel Centrifugal Pump's Impellers;
不锈钢冲压焊接多级离心泵叶轮优化设计及CFD分析
3.
Study on Application of Hydrostatic Bearing to the Equilibrium of Axial Force of Multistage Centrifugal Pump;
液体静压支承技术在多级离心泵轴向力平衡中的应用研究
4.
Design Optimization and Computer Simulation on Horizontal Stamping and Welding Multistage Centrifugal Pump
卧式冲压焊接多级离心泵的设计优化及计算机模拟
5.
Development of the great-flow control valve used for the vacuumpumping water system with multistage centrifugal pumps
用于多级离心泵抽真空吸水系统的大流量控制阀的开发研制
6.
3-D Analysis for Transient Flow in a Multistage Centrifugal Pump Using Sliding Mesh
应用滑移网格技术分析多级离心泵的三维瞬态流动
7.
sectional multi-stage centrifugal fresh water pump
分段式多级离心清水泵
8.
Measurement of Multi-level Centrifugal Water Pump s Integrative Parameters in Mine;
矿山用多级离心式水泵运行参数检测
9.
single-stage self-priming centrifugal fresh water pump
单级自吸式离心清水泵
10.
diesel-driven single stage centriufugal pump
柴油机驱动单级离心泵
11.
single-stage double-acting centrifugal fresh water pump
单级双动式离心清水泵
12.
single-stage self-priming overhang type centifugal fresh water pump
单级自吸悬臂式离心清水泵
13.
COMPOUND CENTRIFUGAL HEAT PUMP CHILLER
双级离心式高温水源热泵设计应用分析
14.
low-head centrifugal pump
低水头离心泵，低扬程离心泵
15.
3-D Numerical Simulation for Low Specific-speed Centrifugal Pump with Multi-phase Position
低比转数离心泵多相位定常全三维数值模拟
16.
Multi-objective optimization for the geometrical parameters of the low-specific-speed centrifugal impeller
低比转速离心泵叶轮几何参数多目标优化
17.
Centrifuge Pump Monitoring System Based on Multiple Point Interface Network
基于多点接口网络控制的离心泵监控系统设计
18.
" Test methods for centrifugal, mixed flow, axial and regenerative pumps"
GB/T3216-1989离心泵、混流泵、轴流泵和旋涡泵试验方法