1.
Weldig deformation of hyperbolic sheet structure made of titanium alloy
钛合金双曲薄板焊接结构件的焊接变形
2.
CAPM SYSTEM OF ASSEMBLY & WELDING FOR WELDED STRUCTURE OF CONSTRUCTION MACHINERY
工程机械焊接结构件装焊工艺流程及数据管理系统
3.
Study on Comprehensive Mechanical Properties of Titanium Alloy T Type Compound Welds Structural Element;
钛合金T型接头复合焊接结构件综合力学性能研究
4.
It is demanding to fabricate crane bridge as large welded structure, so the upgrade to change its span is very challenging.
起重机桥架作为大型焊接结构件，制造要求高，其改制具有典型意义。
5.
Application of reduced welding stress construction in four feet crane mast of crane ship
减少焊接结构件拘束应力在吊重船四脚起重桅中的应用
6.
Thick Plate Weld Technique in the Large-Scale Steel Framed of Plant Building
厂房大型钢结构厚板构件的焊接技术
7.
Valve body shall have solder ends and 3-pc. design permitting disassembly for brazing installation.
阀体应该是焊接连接,三件式结构,便于铜焊安装时的拆卸。
8.
Adjustment and Elimination of Welding Residual Stresses on Port Machinery Struc tures
港机结构件焊接残余应力的调控与消除
9.
Integrating software -based design of punch bed with welded trunk frame
基于软件集成的箱形焊接结构冲床床身设计
10.
CAE Optimal Design of Casting Process of Steel Casting for Welded-structure Part
焊接结构用铸钢件的铸造工艺CAE优化设计
11.
Elementary Analysis of Sustainment Modality for Preventing from Distortion in Welding Structural Part of Hydraulic Pressure Bracket
液压支架结构件焊接防变形支撑间距初论
12.
Elementary Dissertation of Sustainment Space Between for Preventing from Distortion in Welding Structural Part of Hydraulic Pressure Bracket
液压支架结构件焊接防变形支撑形式浅析
13.
RELIEVING RESIDUAL STRESSES OF THE WELDING WORKPIECE IN THE STEEL STRUCTURE BY VIBRATORY STRESS RELIEF
降低钢结构焊接件残余应力的振动时效法
14.
Weld construction single direction suffer press plank piece the crook loads research
焊接结构中单向受压板件屈曲后承载力研究
15.
New Globe-tube Soldering Techoology of Soldering Hollow Globe-Net-Shelf Struct ure;
焊接空心球网架结构球—管焊接新工艺
16.
Effect of Welding Angle on Fatigue Performance of Welded Structure
焊接角度对焊接结构疲劳性能的影响
17.
Specification for welding of steel structure buildings
建筑钢结构焊接规程
18.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究