1.
The Experimental Research and the Computer Simulation of Remelt Hardening of Camshaft with Tungsten Inert Gas Arc;
凸轮轴氩弧重熔淬火的试验研究和计算机仿真
2.
Influence of argon arc remelting process on microstructure and properties of coating prepared by hot dipping aluminizing on surface Q235 steel
氩弧重熔对Q235钢热浸镀铝层组织和性能的影响
3.
Study on Microstructure and Performance of Ni-SiC Cladding by Argon Arc Cladding
氩弧熔覆Ni-SiC熔覆层组织与性能研究
4.
Re-melding in Ar arc welding of camshaft is particular heat treatment for hardening.
凸轮轴氩弧重新熔化硬化是一独特的热处理方式。
5.
AC argon arc welding machine with non-consumable tungsten electrode
交流非自耗钨熔化极氩弧焊机
6.
Effect of Droplet Transition on Rapid Prototyping by P-MIG
熔滴过渡对脉冲熔化极氩弧焊快速成形的影响
7.
Study on In-situ TiC Reinforced Fe-based Coating Fabricated by TIG Cladding;
钨极氩弧原位合成TiC增强铁基熔敷层的研究
8.
The Research on Argon-Arc Melt Injection NiCr-Cr_3C_2 Surface Composite Coating;
氩弧熔化-注射NiCr-Cr_3C_2表层复合材料的研究
9.
Study on Microstructure and Performance of Ti-based Ti_5Si_3 Layers Prepared by Argon Arc Cladding;
氩弧熔覆制备Ti基Ti_5Si_3表面层组织性能研究
10.
Microstructure and properties of WC particulate reinforced Ni-based composite coatings formed by argon-arc cladding
氩弧熔覆WC增强镍基涂层的组织与性能分析
11.
Microstructure and wear resistance of in-situ synthesized TiCp/Ni60A composite coating by argon arc cladding
氩弧熔敷原位自生TiCp/Ni60A复合材料组织和耐磨性
12.
Investigation of Surface Modification of Al Alloy by Laser-TIG Hybrid Melt Injection WC Powder
Al合金表面激光-钨极氩弧复合熔注WC颗粒研究
13.
Microstructure and Properties of WC-steel Composite Coating Produced by Argon-arc Welding
氩弧熔覆WC-钢结硬质合金涂层组织性能研究
14.
Analysis of microstructure and wear resistance of SiC/Ni composite coating by argon arc cladding
氩弧熔覆SiC/Ni复合材料涂层组织与抗磨性分析
15.
Effect of Scanning Speed on Microstructure and Property of Argon Arc Cladding Fe-based Layer Coating
熔覆速度对氩弧熔覆铁基合金涂层组织及性能的影响
16.
The Investigation on the Microstructure and Wear Mechanism of In-situ Synthesis TiC-TiB_2 Particulates Reinforce Metal-matrix Composite Coatings by Gas Tungsten Arc Cladding
氩弧熔覆原位合成TiC-TiB_2增强金属基复合涂层及其磨损机理研究
17.
MICROSTRUCTURE ANALYSIS OF INTERFACIAL LAYER WITH TUNGSTEN INERT GAS WELDING-BRAZING JOINT OF ALUMINUM ALLOY/STAINLESS STEEL
铝合金/不锈钢钨极氩弧熔-钎焊接头界面层的微观结构分析
18.
Microstructure and wear resistance of argon arc cladding Ni-Mo-Zr-WC-B4_C composite coating
氩弧熔覆Ni-Mo-Zr-WC-B_4C复合材料涂层组织与耐磨性