说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 摩擦压扭
1.
Made of Ultra-Fine Grained Construction Material by Transferring the Severe Plastic Deformation Zone during Friction Torsion under Pressure;
采用摩擦压扭强变形区转移法制备超细晶结构材料
2.
Breakaway torque is the total of the torques resulting from bearing friction and seat/disc interference friction at a given pressure differential.
断开扭矩是轴承摩擦力和阀座/蝶板相互影响的摩擦力,在已知压差状态下所产生的扭矩和力。
3.
Description: Static friction torque vs. speed curve during the deceleration phase.
描述:马达在减速阶段的静摩擦扭矩。
4.
head of fluid frictinal loss
流体摩擦阻力损失压头
5.
To press, rub, or hit with the knuckles.
用指关节压、摩擦或叩击
6.
Automobile Friction Clutch Torsion Vibration Characteristic Analysis and Optimization
汽车摩擦离合器扭转振动特性分析及优化设计
7.
Measurement Methods for Frictional Torque of Mechanical Seals Based on LabView
基于LabView的机械密封端面摩擦扭矩的测量方法
8.
Torsional Fretting Characteristics of Polymethylmethacrylate
聚甲基丙烯酸甲酯的扭动微动摩擦学特性
9.
Torsional springs. Torsional springs that are loose and seem to have lost tension require replacement of the complete friction disk.
扭转弹簧:扭转弹簧松弛,似乎失去弹性,需更换整个摩擦盘。
10.
Calculation method of pressure field distributed parameter of hydraulic friction pairs
液压摩擦副压力场分布参数计算方法
11.
Study on frictional effect between extrusion container and billet in forward extrusion forming
挤压筒摩擦对正挤压成形影响的研究
12.
"To damage (plant tissue), as by abrasion or pressure."
碰伤(植物组织),如由于摩擦或挤压。
13.
Roller mills grind essentially by crushing and attrition.
辊磨机主要靠挤压和摩擦研碎物料。
14.
The Study of the Hydraulic Pressure and Rotates Speed Measuring & Controlling System for Friction Welding Machine;
摩擦焊机液压、转速测控系统的研制
15.
Study on Dry-Friction Mechnical Seal in the Condition of Low Speed and High Pressure
高压低速干摩擦机械密封性能的研究
16.
Adaptive Dynamic Friction Compensation of Hydraulic Simulator
液压转台的自适应动态摩擦补偿研究
17.
Friction and Wear Performance of the Hydraulic Motor Friction Pair with Liquid Dispersant-radiation Condition
液体分散剂-辐射器条件下液压马达中摩擦副摩擦磨损性能研究
18.
Ensure the torsion bar is fitted in the correct position to prevent contact with the suspension frame.
确保扭力杆安装在正确的位置以防止与悬架摩擦。