说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 钢液流场
1.
Simulation on Flow Field and Temperature Field of Molten Steel in Bloom Mold with EMS
电磁搅拌结晶器钢液流场和温度场模拟仿真
2.
STUDY ON THE FLOW PATTERN AND TRANSFERRING CHARACTERISTIC IN THE TUNDISH FOR ELECTROMAGNETIC PURIFICATION BY WATER MODELING
电磁净化中间包中钢液流场及传输行为的水模拟研究
3.
Influences of Flow and Temperature Fields on Slag Sticking of Immersion Tube during RH Refining Process
RH精炼中钢液温度场与流场对浸渍管粘渣的影响
4.
Numerical Simulation of Electromagnetic Field and Molten Steel Flow in Slab Continuous Casting Mold with Multimode Electromagnetic Stirring
多模式电磁搅拌板坯连铸结晶器内电磁场与钢液流动数值模拟
5.
3D Electromagnetic Field and Molten Steel Flow in Slab Continuous Casting Mold with Multimode Electromagnetic Stirring
多模式电磁搅拌板坯连铸结晶器内的三维电磁场和钢液流动
6.
In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.
下注法是把钢液浇人中心注管,钢液从中心注管通过流钢槽流到若干个钢锭模底。
7.
Research on Enhancement of Denitrogenizaion and Deoxidation from Melt Steel in Physical Field;
外场作用下强化钢液脱氮、脱氧的研究
8.
Mathematical model of molten steel circulation in ladle with Ar blast
钢包吹氩时钢液循环流动过程数学模型研究
9.
Comparison between Gas and Liquid Vortex Flow Field in Spiral Flow Finishing by Numerical Simulation
螺旋流光整加工中气流场和液流场的仿真模拟
10.
Numerical simulation on steel fluid field and surface fluctuation in mold for slab casting
板坯结晶器内钢液流动及液面波动的数值模拟
11.
Numerical simulation of liquid steel flowing in RH refining process and its application
RH精炼过程钢液流动数值模拟和应用
12.
Numerical simulation of the two-phase flow in cyclone gas-liquid separator
旋流式气液分离器内流场的数值模拟
13.
Study on Hydraulic Model Simulation of 30 t One-strand Continuous Billet Casting Tundish
30t单流板坯连铸中间包内钢液流动的物理模拟
14.
Numerical Simulation on Molten Steel Flow and Circulation Flow Rate in RH Vacuum Degassing Process
RH精炼过程钢液流动行为与循环流量数值模拟
15.
Research on Molten Steel Flow and the Movement of Inclusion in 5 Strand Billet Caster Tundish at CISCO.;
重钢5流方坯连铸中间包内钢液流动和夹杂物运动的研究
16.
Experimental Investigation on Flow Field in Continuous Casting Mold for Clad Steel
不锈钢/普碳钢复合连铸结晶器内流场实验研究
17.
Experimental Research on Flow in the Efflux Element of the Hydro-efflux Hammer with PIV;
液动射流式冲击器射流元件流场PIV试验研究
18.
Investigation on supersonic cold flow and liquid jet over struts
支板超声速冷流流场及液体喷流混合特性