1.
STUDY ON CUTTING FORCE IN RECTANGULAR GROOVE CUTTING AND SIDE DEFORMATION OF CHIP
矩形槽切削的切削力及切屑横向变形的研究
2.
Vibration equations of the thick flat shells by transverse shearing deformation
考虑横向剪切变形厚扁壳的动力方程
3.
Large Deformation of Elastic Thin Beam-Plate with One Side Fixed in a Cross-Flow
弹性梁式薄板在横向绕流中的大变形
4.
Model Analysis on Change Rate of Horizontal Acceleration in Line Shape Comfortableness of Road
道路线形舒适性中横向加速度变化率模型分析
5.
Transverse/cross/lateral contraction deformation：The component contracts in the upright direction of weld after weiding.
横向收缩变形：构件焊后在垂直焊缝方向上发生的收缩。
6.
Displacement fundamental equations of the thick plates bending and the general solution to simply supported rectangular plates by transvers shearing defomation
考虑横向剪切变形厚板弯曲的位移型方程及简支矩形板的一般解
7.
Regulation mega frame structure behavior result in wind pressure along with horizontal position variety influence
风压沿建筑物横向变化对规则巨型框架结构变形的影响
8.
transverse moving blade shaper
横向移动刮刀式整形机
9.
multiple beam lateral-shear interferometer
多光束横向切变干涉仪
10.
free to deflect [unbraced]
自由变位〔无横向支撑〕
11.
The Effects of Taizhong-Jinjiang Transverse Structure Belt on Cenozoic Diastrophism and Earthquake of Fujian Province
台中—晋江横向构造带对福建现代地壳变形和地震的影响
12.
Extended 2-D Numerical Modal Considering Transverse Transport of Sediment and Bank Deformation in Bend Flow Based on Moving Coordinate
移动坐标下考虑弯道横向输沙及河岸变形的平面二维数学模型
13.
horizontal rolled position
转动横向焊位置(指管子环形接头横向焊
14.
horizontal fixed position
固定横向焊位置(指管子环形接头横向焊
15.
Lateral Buckling Analysis of Thin-Walled Structures with Irregular Cross Section;
不规则横截面形状薄壁结构的横向稳定分析
16.
It has an expanded network composed of superfine fibers and joints.
膨体聚四氟乙烯生料带并具有韧性好、纵向强度高、横向易于变形的特点。
17.
Spatial Variation of the Morphometric Parameters of Simple Transverse Dunes over the Tall-complex Longitudinal Ridges in the Hinterland of the Taklimakan Desert
塔克拉玛干沙漠腹地高大复杂纵向沙垄区简单横向沙丘形态特征的空间变异
18.
In this paper, the effect of feeding speed on peen-forming is studied thorugh experiments, which shows that chordwise peen-forming deformation is the exponential function of feeding speed.
试验研究了送进速度与抛丸成形之间的关系，结果显示，横向抛丸变形是送进速度的指数函数。