1.
A Study on Solidifying Crystallization Behavior of Mold Flux for Hypoperitectic Steel Slab Casting
亚包晶钢板坯连铸保护渣凝固结晶行为的研究
2.
Liquid Steel Solidifing State Analysis in Mould the C C.slab
板坯连铸结晶器内钢液凝固状态分析
3.
Recrystallization Behavior of Directionally Solidified DZ125 Superalloy
DZ125定向凝固合金的再结晶行为研究
4.
Microstructure and Properties of Rapidly Solidified Cu-Sn Hypoperitectic Alloys;
快速凝固Cu-Sn亚包晶合金的微观结构与性能
5.
Effect of Ce on Solidification and Rolling Deformation of AZ31;
铈对变形镁合金AZ31结晶凝固和轧制性能的影响
6.
DZ4 Alloy Direction Detection Coagulation Turbine Blade Recrystallization Experimental Study;
DZ4合金定向凝固涡轮叶片再结晶试验研究
7.
A Review of Three Kinds Determination Method for Melting Point, Crystallizing Point and Solidification Point
熔点、结晶点和凝固点三种测定方法的评述
8.
Finite element numerical simulation on solidification heat transfer inside continuous casting mould for blooms
方坯连铸结晶器凝固传热的有限元数值模拟
9.
Numerical Simulation of Level of Mold Solidification Process Based on FLUENT
基于FLUENT对水平连铸结晶器凝固过程数值模拟
10.
Research on Dynamic Recrystallization Behavior of Directionally Solidified DZ4 Superalloy
定向凝固高温合金DZ4的动态再结晶行为研究
11.
Liquid-Liquid Structure Transitions in Eutectic and Solid-Solution Binary Alloys and Their Effects on Solidification;
共晶系和匀晶系二元合金熔体结构转变及其对凝固的影响
12.
At the same time the result of2 D simulation with Dendrite Envelope Tracking Method has been presented.
同时给出了用枝晶包膜跟踪法计算的二维凝固模拟结果。
13.
Numerical Simulation on Solidification and Thermal Stress of Solid Shell in Continuous Casting Mold based on Meshless Method;
基于无网格法的连铸结晶器内坯壳凝固与热应力的数值模拟
14.
The Enthalpy Analysis in Process of Solidification of Continuous Casting Mold by the Technology of Steel Strip Feeding
连铸结晶器内喂钢带工艺凝固过程的热焓法分析
15.
Online Visualization for Heat Transfer and Solidification in Slab Continuous Casting Mould
面向在线的连铸结晶器传热与铸坯凝固可视化系统
16.
COUPLED SIMULATION ON FLOWING AND SOLIDIFYING OF STEEL IN THE BEAM BLANK MOULD
异型坯结晶器内钢水流动和凝固过程的耦合数值模拟
17.
Influence of Coating on the Surface Recrystallization of Directionally Solidified Superalloy
涂层对定向凝固高温合金表面再结晶的影响研究
18.
Numerical Simulation for Temperature Distribution of Initial Solidifying Shell with Mold Tube During Bloom Casting of U71Mn Steel
U71Mn大方坯凝固坯壳与结晶器铜管温度场的数值模拟